GL9100 Series - Static Safe Hot Gloves - Polyester - 14"

Static Safe Hot Gloves give you great static control and heat protection in one cleanroom compatible glove.

Static Safe Hot Gloves  are designed for printed circuit boards, hybrid circuits, semiconductors and other processes, the GL9100 series ESD safe hot glove provides static protection without compromising cleanliness. Gloves resist heat up to 302°F or 150°C.

• Have static control and heat resistance in one glove
• Gloves resist up to 302°F(150°C)
• 100% inner tricot knit polyester fabric liner
• Clean room safe
• Cuff mounted Grounding snap
  
  

These gloves use a polyester knit fabric suffused with carbon fiber. Heat protection is enhanced with a 100% inner tricot knit polyester fabric liner and a full 14 inch length. A cuff mounted grounding snap is also included.

Specifications:

• Fabric : Polyester knit fabric suffused with carbon fiber.
• Inner Liner: 100% inner tricot knit polyester fabric.
• Length: 14in
• Temperature: Resists up to 302F (150C)
• Electrical RTT: < 1 x 10^10 Ohms/Sq.
• Low tribocharging: typical results less than 300 volt

Application and Usage
Semiconductor, SMT Assembly, Disk Drive. Applications that require thermal glove protection, static and contamination control.

Care Instructions
The ESD inspection gloves may be laundered for repeated use.

• Mild detergent only.
• Use less detergent than for regular load of clothing.
• Do not use dish soap.
• Do not bleach.
• Do not put in the dryer.

 

GL9100 Series Glove Measurements* Size S M L XL Length (in) 13.5 13.5 14 14 Width (in) 5 6 6 6.5 Weight (oz) 1.2 1.5 1.8 1.9 Cuff Color Green Red Yellow Blue