Turn Signal Switch - Compatible with 1998 - 2003 Toyota Sienna 3.0L V6 1999 2000 2001 2002

I am very satisfied with the purchase of the switch, to resolve my intermittent left turn signal issue. I was able to replace it myself. It fits perfectly. The key is to remove the steering wheel column cover without removing the steering wheel. There are three screws holding it. Two of them are behind the steering wheel. The trick is to turn the steering wheel 90 degree left/right to expose the two screws respectively. After the screws are removed, the upper and lower parts of the column cover can be separated and can be taken out. When doing so, I moved the steering wheel position to top to remove the lower column plastic cover first, then pushed the steering wheel low to the bottom to remove the upper column plastic cover. Then the whole column are exposed. I disconnected battery and waited 5 minutes to dis-arm the airbag. There are two screws holding the turn signal switch to the steering column with a connector. Removing them were easy and the switch slid out smooth.