Seco-Larm SL-3301-BAQ Enforcer Multi-Color LED Strobe Light

Use the Seco-Larm Enforcer Multi-Color LED Strobe Light to add more versatility and enhance the security on your property. This LED strobe light can change between 7 different colors (Red, Green, Blue, Cyan, Magenta, Yellow, and White) and has 3 trigger input wires, allowing it to be triggered by external devices or it can be set manually via DIP switches. It also features 5 vertical LED strips (25 LEDs total) to help increase its visibility from all directions and has an adjustable strobe speed of 60 - 260 times/min. The Seco-Larm Enforcer Multi-Color LED Strobe Light also comes in a high-impact, weather resistant (IP66) case with reverse polarity protection and an impact and heat resistant lens. Installation is simple with 2 to 5 wires, plus, it has an operation life of more than 50,000 hours, which is more than 160 times that of other strobe lights. Seco-Larm offers an impressive line of products, ranging from simple switches to some of the most sophisticated alarm devices. Whether for physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers such an extensive range of dependable, cost-effective security products with a full program of service and support. Features: Vertical LED Strips: 5. Total Number of LEDs: 25. Possible Colors: Red, Green, Blue, Cyan, Magenta, Yellow, White. Operating Voltage: 9~24 VAC/VDC. Current draw @12VDC (max.). Strobe: 350mA. Steady ON: 350mA. Adjustable strobe speed. Maximum setting: 260 times/min. Minimum setting: 60 times/min. Operating Life: Over 50,000 hours (over 5.7 years). Operating Temperature: -4°~144° F (-20°~65° C). Electrical Protection: Reverse polarity protected. IP Rating: IP66. Base: High-impact resistant black ABS. Lens: High-impact heat-resistant acrylic. Dimensions: 3-15/16 x 3-1/8 inches (100 x 79 mm). Manufacturer Part #: SL-3301-BAQ.