Rit All Purpose Dye, Coral, 8 fl oz

Color results vary by fabric type, amount of dye used water temperature and time in the dye bath. Not recommended for synthetic fibers (fabrics containing more than 35% polyester, acrylic or acetate). Instead, use Rit dye as a more synthetic fiber dye. Not recommended for fabrics with a rubber backing or labelled cold water wash or dry clean only. May not be effective on bleach-damaged fabrics. If in doubt, test dye a swatch first. Package color reflects approximate results when dyeing white or off-white 100% cotton. Preparation: Pre-wash fabric to remove any finishes or stains. For every pound of dry fabric (i.e. 2 adult large T-shirts), use 1/2 bottle (4 oz.) of dye with 3 gallons of the hottest water safe for fabric. The dye bath must have enough water for the fabric to move freely. To achieve a darker or more intense color, double dye quantity if dyeing to a lighter or different color and use Rit color remover before dyeing to reduce the existing color in most fabrics. Do not use bleach to remove color. Directions: Shake well before using. Wear rubber gloves. Add hot water to a plastic bucket, stainless steel sink or stainless steel pot. Ideally, the water temperature should be 140 degrees for greater. Add 1 teaspoon of liquid dish detergent.