Ips Corporation 10148 1 Pint Gray 717 PVC Cement

Weld On Pool Heavy Gray Glue (1 Pint) Weld-On Pool Heavy Gray Glue (1 Pint) (13568) WELD-ON 746 Pool Heavy is for use on all types of PVC plastic pipe pool & spa applications. WELD-ON 746 Pool Heavy is a clear or gray, low VOC emission, heavy-bodied, medium setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings, including Schedule 80, with an interference fit through 12 inches (315 mm) diameter. Can be used on non-pressure applications through 18 inches (450mm) diameter. It has good gap-filling properties and is recommended for solvent cementing joints where a sizable gap exists between pipe and fitting, large pipe sizes, and when more working time is required in warm weather. NOTE: WELD-ON solvent types of cement must never be used in a PVC system using or being tested by compressed air or gases; including air-over-water booster. Shelf Life: 3 years in tightly sealed containers. The date code of manufacture is stamped on the bottom of the container. The stability of the product is limited by the evaporation of the solvent when the container is opened. Evaporation of solvent will cause the cement to thicken and reduce its effectiveness. Adding thinners to change viscosity is not recommended and may significantly change the properties of the cement. Click HERE for the Weld-On Pool Heavy 746 Gray (1 Quart)