INTANAU6MR All-in-one USB 2.0 Flash Card Reader

I checked to be sure I had an extra open USB header on the mother board before buying the reader. With that in hand I was ready to go. The tower I wanted to put the reader in only had 5.25 inch drive spaces so I needed a 3.5 to 5.25 drive adapter. I had a couple of them in the junk box. If you want to put it into a 3.5 inch slot your're in business. Otherwise you will need to get the proper adapter. Otherwise the install was quite easy. The USB I/O cable was long enough for my particular setup, but it would be nice to have a bit more length for it if your tower is a bit larger. The reader uses one of the USB ports for the various card slots. It is nice that the second USB brought up from the header was used for a USB port on the front of the reader. Even though I have four others brought out to the very top of the front panel, the extra one on the reader is located further down on the tower and is easier to get to. All in all a great buy.