

220V Chicken Feed Pellet Mill Machine 2.5MM 3-Head Pressure Roller Animal Feed Pellet Machine
Key item features
- Equipped with 3 pieces of compression rollers which are made of high-quality steel. Through high temperature quenching, it becomes better in resistance to wear and high temperature.
- Equipped with a 3.5kW motor,it can produce up to 330 lbs of uniform feed pellets per hour,ideal for small to medium poultry farms or livestock operations.
- The machine adopts the design of enlarged feed port, which makes it more convenient for you to feed and effectively improves work efficiency. This machine is equipped with an enlarged and widened discharge port to prevent feed splashing and facilitate the collection of feed by customers.
- This feed pellet maker is mainly suitable for the processing of rabbits, fish, ducks, chickens, shrimps, pigs, cattle, sheep pellets. You can add hay, straw, corn, alfalfa, soybeans and other grains etc. It widely used in industrial, organic fertilizer particles, etc.
- We suggest that this feed pellet machine should be directly connected to the main power supply to ensure stable voltage. Additionally, please note that the machine does not include a plug, and it is recommended to connect it to the breaker box in your home for stable operation.
Specs
- BrandMaisutseb
- Has nrtl listing certificationN
More seller options (1)
About this item
Product details
Introduction:
Feed granulator is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants.
This machine can be used alone, and customers who need it can also match it with a straw cutter for better results.
Note:
1. Do not touch the running parts during operation.
Do not put the hands into the machine.
2. Before using the machine, it is necessary to adjust the screw of the pressure roller to the appropriate position. The pressure roller and the pressure plate should be closely combined, and the three adjusting screws should be on the same horizontal plane.
3. Please refuel the fuel tank before using the machine. The machine should not idle for more than 2 minutes.
4.Double-check the belt and the screws before operation.
5.Clean up the rest after use to prevent damage to the machine.
6.If the pressure roller cannot rotate normally, please tighten the screws that control the pressure roller first, and then try to power it on. If it still does not work, you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again (without special tightening)
7.The colors of air switches and wires are randomly shipped.
Product parameter:
Pressure plate: 2.5MM
Output/h: Maximum output 150KG (ideal state)
Power: 3.5KW
Voltage: 220V Single-phase electricity
Product body material: Cast iron
Standard pressure roller: Three head press roller
Product size: 27.56*11.22*34.6in(70*28.5*88cm)
Note:
We suggest that high-power machines should be directly connected to the main power supply, as the voltage reaching the machine is stable. If the voltage is unstable and the current exceeds the rated current of the motor, it is easy to burn out the starting capacitor.
It is recommended to directly connect to the power supply as much as possible. If the machine is not connected to the power supply, different situations may occur, and the wires are not durable. The wires will gradually burn out over time.
Our machine is not equipped with a plug. If you do not know how to operate the wiring video, you can contact our customer service and we will provide you with the wiring video. (If there are occasional situations with plugs, it is also recommended that you remove the plugs when wiring).
The output of the feed pellet machine just received is too low, and it is normal to produce a lot of powder or even no pellets because it is a brand new machine and needs a certain running-in time. When the die hole finish is poor for the first time, it is necessary to use abrasives to grind the template. After the machine has been used for a period of time and the various parts of the pellet machine run in the best state, the yield and output quality of the pellet machine will reach the best state. It is a normal phenomenon.
Item Number: 1*Chicken Feed Pellet Mill Machine 220V (238014)
- Equipped with 3 pieces of compression rollers which are made of high-quality steel. Through high temperature quenching, it becomes better in resistance to wear and high temperature.
- Equipped with a 3.5kW motor,it can produce up to 330 lbs of uniform feed pellets per hour,ideal for small to medium poultry farms or livestock operations.
- The machine adopts the design of enlarged feed port, which makes it more convenient for you to feed and effectively improves work efficiency. This machine is equipped with an enlarged and widened discharge port to prevent feed splashing and facilitate the collection of feed by customers.
- This feed pellet maker is mainly suitable for the processing of rabbits, fish, ducks, chickens, shrimps, pigs, cattle, sheep pellets. You can add hay, straw, corn, alfalfa, soybeans and other grains etc. It widely used in industrial, organic fertilizer particles, etc.
- We suggest that this feed pellet machine should be directly connected to the main power supply to ensure stable voltage. Additionally, please note that the machine does not include a plug, and it is recommended to connect it to the breaker box in your home for stable operation.
Specifications
Brand
Has nrtl listing certification
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
