Patco Outdoor-Grade Surface Protection Tape [Removable / UV Stabilized] (5005): 3/4 in. x 36 yds. (Clear)

Patco 5005 Outdoor-Grade Surface Protection Tape is a clear polyethylene film tape which is UV and abrasion-resistant. It is used as an indoor and outdoor surface protection tape as well as for patching, seaming, and overlaminating. Great for general protection against moisture, UV, chemicals, solvents, and abrasion.Features & Benefits • Tough and durable.- Non-Yellowing adhesive.- Provides strong bond but still removes cleanly from most surfaces.- Stands up to harsh environments.- Clear film for invisible protection.- Excellent long-term stability. Made in the U.S. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This products actual size is 18mm x 108 ft. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the users responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter - Backing/Carrier: medium density polyethylene (MDPE) film - Adhesive: acrylic - Thickness: 5.5 mils (carrier, adhesive) 4.5 mils (carrier) - Adhesion: 32 ounces per inch (to stainless steel test panel) - Tensile Strength: 11 pounds per inch (longitudinal) - Application Temperature: 50F to 120F - Service/Operating Temperature: -40F to 190F - Elongation: 500 %