What is this?
These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.
What will i get?
Ceiling Fan Blade Screws
Color: Silver;
Material: Carbon Steel;
Total Size: 8.6 x 18mm/0.34 x 0.71 Inch (DxL);
Thread Size: 1/4“-20 UNC;
Thread Length: 15mm/0.59 Inch.
Are there any advantages of the product?
Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise.
Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings.
Universal Fit: Suitable for Most ceiling fans.
Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
How to use it?
1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws.
2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket.
3. Insert & Tighten: Hand-start the screw, then secure diagonally
What should I notice?
1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts.
2. Compatibility: For wood/composite blades only; Metal blades require longer screws.
3. Storage: Keep in a sealed bag to prevent washer oxidation.
4. Replacement Tip: Replace all screws per fan.
WARNING: 