Digital Dynamometer Force Measuring Instruments Thrust Tester Digital Push Pull Force Gauge Tester Meter ,Simple

Product Description:

This product is a simple push pull force gauge with high performance.

Screen display

1.Peak mode: After turn on,enter into the measuring interface,click "SET" button can enter into the peak mode directly,record the Max. force value during measuring.

2.Push pull force shows:do not move the gauge,the above arrow shows the pull force,the below arrow shows the push force.

3.Measuring force value display.

4.Three units:N(newton),kg(kilogram),lb(pound) display respectively ,press "UNIT" button to switch .

5.Power display.

The key introduction

OFF/ON(start up ,shut down key):when press this key,turn on the power,appear measuring interface.Press this key again can shut down gauge.

ZERO(zero key)The testing value on the screen can be zero when click this key. UNIT( switch unit key)It can switch three different unit s when click this key.

ELK Series Analog Dynamometer Parameter:

Mode

ELK-2

ELK-3

ELK-5

ELK-10

ELK-20

ELK-30

ELK-50

ELK-100

ELK-200

ELK-300

ELK-500

The Max Load Value

2N

3N

5N

10N

20N

30N

50N

100N

200N

300N

500N

0.2kg

0.3kg

0.5kg

1kg

2kg

3kg

5kg

10kg

20kg

30kg

50kg

0.45Lb

0.65Lb

1.1Lb

2.2Lb

4.5Lb

6.5Lb

11Lb

22Lb

45Lb

65Lb

110Lb

Load Value Resolution

0.001N

0.01N

0.1N

0.001KG

0.001KG

0.01KG

0.001Lb

0.001Lb

0.01Lb

The sensor

Built-in Sensor

Precision

±0.5%

Power

3.7V lithium battery

Charging Time

4-6 hours

Continuous Usage Time

About 15 hours

Battery Life

300 times

Charger

Input AC 100-240V 50-60Hz Output: 5V 1000mA

Working Temp.

5-35 centi-degree

Transportation Temp.

-10-60 centi-degree

Relative Humidity

15%-80%RH

Work Environment

No focus, Non-corrosive in surrounding

Related Products:

grip strength trainer,

grip strength tester,

grip strength,

hand gripper,

hand strengthening devices,

dynamometer,

hand grip dynamometer,

hand dynamometer,

handheld dynamometer,

grip dynamometer