Features:
* AHD 1080P High Definition Reverse Camera: 2083 sensor chip, video switch button, 1920*1080 pixels, 0.01 lumens, supports high-quality for night vision images, 170-degree viewing angle, no need to worry about blind spots, IP68 waterproof, works normally in car washing or bad weather conditions, excellent for night vision effect, suitable for trucks, SUVs, small vans, campers, RVs, pickups, and more .
* Also supports AHD and CVBS video signals: This vehicle front and rear side view camera is equipped with a video switch button, which can be used with all AHD displays and CVBS displays. The default output video signal is CVBS. If you need to connect an AHD display, hold the button for 5 seconds to switch to the desired video format. The AHD video signal image is much clearer than CVBS.
* Built-in rotating metal camera body: Different from the old-fashioned vehicle cameras that can only adjust the viewing angle by adding spacers, you can rotate the lens part of the GreenYi microphone rear camera with a mini wrench to find the best viewing angle, without worrying about the image displayed on the monitor being too high or too low. Mini design, sturdy and shiny metal casing, shockproof, longer service life.
* Can be used as a rear view or front view camera: You can install the caravan blind spot camera at any desired position, whether vertically (inverted) or horizontally, because the camera body can rotate 360 degrees. This camera defaults to displaying the mirror and wiring, used as a reverse camera. If you want to use it as a front view or side view camera, cut off the green part, the wiring will be turned off.
* IP68-level waterproof reverse camera: When manufacturing reverse cameras, we have made every effort to enhance their waterproof level. We wrapped the entire camera body with waterproof silicone rubber and conducted 24-hour underwater tests on each camera to it can work normally in extreme conditions.
* Reverse camera compatible with displays supporting for RCA interface: This reverse camera is only applicable to displays supporting for RCA interface. For ordinary rearview mirrors or TFT displays, no trigger detection cable is needed. When used with a wireless host, be sure to connect the trigger cable.
Specifications:
