Chicken Feed Pellet Mill Machine Animal Feed Pellet Machine 6MM 220V

Description:
Feed granulator is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants.
This machine can be used alone, and customers who need it can also match it with a straw cutter for better results.

Parameter:
Pressure plate: 4MM
Output/h Maximum output 150KG (ideal state)
Power: 3.5KW
Voltage: 220V Single-phase electricity
Product body material: Cast iron
Standard pressure roller: Three head press roller
Product size: 27.56*11.22*34.6in(70*28.5*88cm)

Note:
1. Do not touch the running parts during operation.
Do not put the hands into the machine.
2. Before using the machine, it is necessary to adjust the screw of the pressure roller to the appropriate position. The pressure roller and the pressure plate should be closely combined, and the three adjusting screws should be on the same horizontal plane.
3. Please refuel the fuel tank before using the machine. The machine should not idle for more than 2 minutes.
4. Double-check the belt and the screws before operation.
5. Clean up the rest after use to prevent damage to the machine.
6. If the pressure roller cannot rotate normally, please tighten the screws that control the pressure roller first, and then try to power it on. If it still does not work, you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again (without special tightening)
7. The colors of air switches and wires are randomly shipped.

We suggest that high-power machines should be directly connected to the main power supply, as the voltage reaching the machine is stable. If the voltage is unstable and the current exceeds the rated current of the motor, it is easy to burn out the starting capacitor.
It is recommended to directly connect to the power supply as much as possible. If the machine is not connected to the power supply, different situations may occur, and the wires are not durable. The wires will gradually burn out over time.
Our machine is not equipped with a plug. If you do not know how to operate the wiring video, you can contact our customer service and we will provide you with the wiring video. (If there are occasional situations with plugs, it is also recommended that you remove the plugs when wiring).
The output of the feed pellet machine just received is too low, and it is normal to produce a lot of powder or even no pellets because it is a brand new machine and needs a certain running-in time. When the die hole finish is poor for the first time, it is necessary to use abrasives to grind the template. After the machine has been used for a period of time and the various parts of the pellet machine run in the best state, the yield and output quality of the pellet machine will reach the best state. It is a normal phenomenon.

Usage and specification:
1: It applies to chicken industry.
2: Corn particles can be put into the machine directly. The feed processed by the machine is smooth and has moderate hardness. The temperature change during the process is slight so the nutrition can be kept very well.
3: The actual diameter of the holes can be divided into: Φ2, Φ3, Φ4, Φ5, Φ6, Φ8, Φ10, Φ12.
4: The microorganism and parasite can be killed in the process of extrusion.

Item included(238010):
Techtongda 4mm Chicken Feed Pellet Mill Machine 220V