Note:

1. Our LED bulbs only replace halogen or led bulbs.Can not replace the HID bulbs. Please double check before order. If you are unsure the item fit or not, please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not, thank you.

2. Please note that some vehicles may require install decoder or load resistor to avoid error message, turn signal hyper flash or fast blinking.This is NOT a problem of LED bulb and is NOT covered by warranty.To confirm if need a DECODER or not, just remove the original headlight bulb and check if the dashboard show BULB ERROR or not.This listing do not included bulb adapter, some of the car need add bulb adapter to get the LED bulbs replace the halogen bulbs(Normally H7 and H1 need special adapter).

* PRODUCT DESCRIPTION:

LED headlight bulbs:

Socket type: 9008/H13 LED headlight bulbs (High Beam and Low Beam)
* 1. Material: Aviation 7041 aluminum profile
* 2. Bulb color: black
* 3. LED Quantity(each bulb): 4pcs* LED Chips
* 4. Type of light: spotlights, headlights
* 5. Color temperature: 6000K White color
* 6. Lumen: 11000 lm / set (5500 lm / bulb)
* 7. Power: 55W / bulb, 110W / set
* 8. Lifespan:> 50000 hrs
* 9. Operating Voltage: DC 9-32V (12V, 24V vehicles compatible)
* 10.Operating Temperature: -40-80 degree Celsius
* 11. Heat dissipation: aviation aluminum + fan
* 12. Waterproof: IP68
* 13. Beam angle: 360
* 14.Usage: headlight,fog light

LED Fog Light bulbs:

Socket type: 9145/9140 LED Fog Light bulbs
LED Quantity(each bulb): 2pcs* 3570 CSP chips
Power:72W/set
Luminous Flux: 12000LM/set (6000LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP68 rated water and dust seal, over 30000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light

Package includes:

1x Pair of 9008/H13 LED High Beam and Low Beam Bulbs
1x Pair of 9145/9140 LED Fog Light Bulbs

Installation Caution:

1. As a safety measure, make sure the car has had time to cool down properly before beginning the installation process.
2. Park the vehicle or make sure it is running smoothly.
3. Make sure to turn off the ignition and remove the keys.
4. Take care to avoid burns, especially when turning vehicle lighting on or off.
5. Take care to avoid crushing or cutting the bulbs. Also be sure not to touch the bulbs with your fingers, as this will cause staining.
6. Completely examine the connection of the contact points, ports and cables, as poor connections can cause lighting problems.
7. Make sure the end of the bulb does not come into contact with the inner headlight shield when adjusting the bulb.

NOTE:

* Comments

If you have any problem with your order, please contact us AFTER SALE and we will do our best to make you satisfied, please do not leave a NEGATIVE RATING or CLAIM before.