Feature:
1. Process the two workpieces into 45 bevels, then clean the 45-degree bevels assembled together, and assemble the two 45-degree workpieces at 90 degrees to each other, using a jig for plastic extrusion seams.
2. Place the bottom of the wide stone on the work surfaces of the jig fitted with white rubber, and the side of the narrow stone close to the 90 inside the jig
3. The two stapler levers can then be adjusted by: adjusting the spring mechanism to the top position of the workpiece, then turning the screw on the top of the stapler lever to apply pressure to hold the clamp in place for a certain amount of time until the workpiece is fully bonded , then loosen the clamp.
Specifications:
Product Name: Angle seam joint (45 degree clip)
Material: Metal Alloy
Applicable: Mainly used for artificial and natural tiles, or other similar degree splices
Color:silver
Clamping height: 150mm/325mm
Size:as show
Package content:
1 x Angle seam joint
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
