Rivetwell - Double Rivet Units Starter units consist of four standard angle posts, *two left-to-right standard double rivet angle/channel beams per level and two front-to-back standard double rivet angle beams per level.
Adder units consist of two standard T-Posts, two left-to-right standard double rivet angle/channel beams per level and two front-to-back standard double rivet angle beams per level. Channel beam units are provided with left-to-right double rivet angle beams at bottom level.
Rivetwell™ Boltless Shelving Specification Angle Post (Standard-Duty)TOWNHALL
Shall be 1-1/2 in. x 1-1/2 in. x 14 gauge cold rolled steel corner post uprights. Perfect for standard load situations.
Angle Post (Heavy-Duty) Shall be 1-7/8 in. x 1-7/8 in. x 14 gauge cold rolled steel uprights. The choice when heavy-duty shelving is required. Perfect for multilevel installations.
T-Post (Standard-Duty) Shall be 3 in. x 1-7/8 in. x 14 gauge cold rolled steel intermediate uprights. This post is used for both standard duty and heavy-duty add-on units.
T-Post (Heavy-Duty) Shall be 3-3/4 in. x 1-7/8 in. x 14 gauge cold rolled steel intermediate uprights. This post is used for both standard duty and heavy-duty add-on units.Post Splice - Shall be 1-3/8 in. x 1-3/8 in. x 5 in. x 11 gauge cold rolled steel uprights. Used to extend posts. Splices attach to outside of post. One required per Angle Post, two required per T-Post.
Double Rivet Angle Beam (Standard-Duty) Shall be 2-3/4 in. x 1 in. x 16 gauge cold rolled steel. This shelf beam is essential for stability of standard units; therefore, is used on all four sides at the top and bottom le- SKU: HLWL6375
WARNING: 