Fence Source Double-Double Bottom Locking Privacy Fence Slat (9 Colors) Double Wall Reinforced with Two Legs Inside - a 4 Foot high Chain Fence (Slat Lenth 44.5", Gray)

Bottom Locking Privacy Fence Slat for Chain Fence. Double wall reinforced with two legs for added strength and longevity. Available for Fence heights 4’, 5’, 6’ and 7’. Coverage: Each box will cover approximately 10 feet of fence (2" mesh, 82 slats, 41 ). The bottom locking devices are included (3 pieces) and will be enough for ten feet of fence. Specifications: Slat is manufactured 3.5" shorter than the overall height of the fence to accommodate the locking device at the bottom of the fence (e.g. 6 ft is 68.5".) Wind load factor and privacy factor for 2" is approximately 75% (1.094" [slat width] x 82 [number of slats] ÷ 120" [10' of fence] = 75% coverage).Slat width is approximately 1-3/32".Designed for 2" to 2.375" and 9, 10, 11, 11.5 gauge wire. A 2" will provide approximately 75% privacy and a larger will have less privacy. Made of HDPE (plastic) - High Density Polyethylene with UV inhibitors to help against sun fading. Made in the USA. Beware of non-USA made slats that may discolor and fade! Limited 30-year pro-rata warranty against breakage under normal conditions. Slat has been sold in all 50 states - good for hot or cold climates. Installation: Insert the privacy slat from the top of the fence down towards the locking device at the bottom of the fence until it clicks into place. The locking device will help secure the slat into place. Measuring Chain Fence : the of chain is measured diagonally in both directions using inside dimensions (see picture). Returns are accepted for unopened items within 30 days of receipt.