Hero image 0 of Cressi Mini 2 Gauge Console, 0 of 2

Cressi Mini 2 Gauge Console

(No ratings yet)

Key item features

The Cressi Mini-Console 2 is a small compact console that houses the Cressi Mini-Manometer Pressure Gauge and a new, small, analog depth gauge. Both gauges are high-quality instruments with chrome plated brass cases and the depth gauge has a diaphragm membrane actuated function. Both gauges have a large circular easy-to-read scale.Â The instruments are housed in a small, modern shaped console boot, made from polycarbonate and desmopan, (a thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very light.Â At the end of the console, slightly to the sides, there are two eyelets for fastening the instrument to the BCD or harness with a clip or lanyard so that it does not hang down with the risk of catching and damaging the environment or the instruments.Â

The luminescent face of the 230' depth gauge, the first 40'Â of depth readings are in 10'Â increments, (which correspond to the area of decompression stops), and are widely spaced for ease-of-reading For at-a-glance monitoring of depth, the face is divided into 3-different colored zones: Green up to 66', light-blue from 66 to 130' and red from 130 to the end of the scale. The instrument has a maximum depth indicator that stops on the maximum depth reached during the dive.Â This function is extremely handy for logging of dive information.

The Mini-Manometer Pressure Gauge luminescent dial reads from 0 to 5000 psi. Like the depth gauge the instruments face is divided into three different colored zones for at-a-glance monitoring of air the area from 600 psi and below is highlighted in red with a solid bar and red stripes. If gauge is used on deeper dives, the red scale extends and fades to 1,300 psi, this provides for added reserve air indication required at greater depths. From 600 to approximately 3,000 psi is green and from 3,000 to end of scale is blue.

The front glass lens is made to act as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. Pressure gauge is equipped with a 7/16" threaded high-pressure hose. The instrument console is made in Italy.
Materials

Housing: Chromed Brass
Lens: Glass
Console Boot: Polycarbonate & Desmopan
Readout

0 to 5000 psi
Luminous Dial

Yes
Attachment Point

Yes
Threads

7/16"
Material

Housing: Chromed Brass
Readout

0 to 230'
Luminous Dial

Yes
Max Depth Indicator

Yes

Specs

Diving gauge type
Depth Diving Gauge
Maximum pressure
5000 psi
Maximum depth
230 ft
Features
Illuminated Dial
Digital/analog
Analog
Brand
Cressi

Current price is $174.95

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Columbus, 43215

Arrives by Wed, Apr 8

Sold and shipped by Austins Diving Center

5 stars out of 5, based on 8 seller reviews(5.0)

Report an issue with this seller

Free 30-day returns

About this item

Product details

Depth Gauge + Pressure Gauge Compact and built to last, this two-gauge console combines a Mini SPG and depth gauge. The textured boot is easy to handle, even while wearing gloves, and can be rigged with a clip or bungee and secured to the diver’s BC for a streamlined profile in the water. Pressure gauge dial is color-coded in red, green and blue for instant readability. Reads pressures to 350 bar or 5000 psi. Mini-depth gauge reads to 70 meters (230 feet) Maximum depth indicator. Luminescent face on the depth gauge. Depth indications spaced out in first 12 meters (40 feet) for precise readings during safety stops. Both instruments built with chrome-plated brass case for maximum durablity. Compact rubber boot is textured for a sure grip. Two connection loops, one on each side, for attaching a clip or bungee. Weight of console: 420 g (includes hose)

The Cressi Mini-Console 2 is a small compact console that houses the Cressi Mini-Manometer Pressure Gauge and a new, small, analog depth gauge. Both gauges are high-quality instruments with chrome plated brass cases and the depth gauge has a diaphragm membrane actuated function. Both gauges have a large circular easy-to-read scale.Â The instruments are housed in a small, modern shaped console boot, made from polycarbonate and desmopan, (a thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very light.Â At the end of the console, slightly to the sides, there are two eyelets for fastening the instrument to the BCD or harness with a clip or lanyard so that it does not hang down with the risk of catching and damaging the environment or the instruments.Â

The luminescent face of the 230' depth gauge, the first 40'Â of depth readings are in 10'Â increments, (which correspond to the area of decompression stops), and are widely spaced for ease-of-reading For at-a-glance monitoring of depth, the face is divided into 3-different colored zones: Green up to 66', light-blue from 66 to 130' and red from 130 to the end of the scale. The instrument has a maximum depth indicator that stops on the maximum depth reached during the dive.Â This function is extremely handy for logging of dive information.

The Mini-Manometer Pressure Gauge luminescent dial reads from 0 to 5000 psi. Like the depth gauge the instruments face is divided into three different colored zones for at-a-glance monitoring of air the area from 600 psi and below is highlighted in red with a solid bar and red stripes. If gauge is used on deeper dives, the red scale extends and fades to 1,300 psi, this provides for added reserve air indication required at greater depths. From 600 to approximately 3,000 psi is green and from 3,000 to end of scale is blue.

The front glass lens is made to act as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. Pressure gauge is equipped with a 7/16" threaded high-pressure hose. The instrument console is made in Italy.
Materials

Housing: Chromed Brass
Lens: Glass
Console Boot: Polycarbonate & Desmopan
Readout

0 to 5000 psi
Luminous Dial

Yes
Attachment Point

Yes
Threads

7/16"
Material

Housing: Chromed Brass
Readout

0 to 230'
Luminous Dial

Yes
Max Depth Indicator

Yes

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Diving gauge type

Depth Diving Gauge

Maximum pressure

5000 psi

Maximum depth

230 ft

Features

Illuminated Dial

Warranty

Warranty information

This product comes with a full manufacturer warranty.

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.