Handheld Pneumatic Capper Plastic Bottle Sealing Capping Sealer Machine, 10-50mm, 9000R/Min Capping Diameter Bottle Capper Sealer Screwing Sealing Machine
Key item features
- 💗【Making Material】Mainly make by aluminum, iron and si-li-cone material, the surface is plated, durable and will not rust to ensure a long service life.
- 💗【High Efficiency】Using high quality motor, smooth running and low noise when using, idling speed: 9000R/Min. it has powerful torque, which can make it easier for you to tighten and loosen the bottle caps. Depending on your proficiency, it can screw 20 to 50 caps per minute and is suitable for semi-automatic assembly lines.
- 💗【About Operation】You just need to press the switch on the capping machine to start working. After tightening the caps, the machine will stop working when the hand is released. The machine is equipped with a knob to adjust the direction of spin, which can be used to both tighten and unscrew bottle caps.
- 💗【Quality Accessories】It is equipped with iron spring balancer, which has strong load-bearing capacity and good stability. It is used to hang the capping machine, easy to pick up and use. Equipped with 4 different sizes of si-li-cone rings, the soft material can effectively prevent damage to the cap, and can be used to tighten different caps sizes flexibly according to the need.
- 💗【Applicable Scope】Our capping machine adopts pneumatic capping working method, comfortable to grip and can work for a long time. Suitable for round caps with a diameter of 10-50mm/0.39-1.96in, and the applicable bottle height is not limited.
Specs
- MaterialAluminum, Iron, Si-li-cone
- BrandDwellnix
- Piece count1
- Free shipping
Free 30-day returns
How do you want your item?
More seller options (1)
About this item
Product details
Product Parameters
This capping machine is made of high-quality iron, which is less prone to damage and guarantees a long service life. Its small size and light weight make it easy to carry. It is ideal for semi-automatic lines as it can be used for efficient capping work.
Material: Aluminum, Iron, Si-li-cone
Power Voltage: Air Compressor to Provide
Working Method: Pneumatic Capping
Idle Speed: 9000R/Min
Air Pressure: 6kg/m2
Suitable Pressure: ≥0.6MPA
Fit Botter Height: ALL
Cap Diameter: 10-50mm/0.39-1.96in
Capping Speed: 20-50PCS/min
Applied Bottle Height: Unlimited
Torque: 5-45Kgf/cm
Weight: 2kg/4.4lbs
Packing Size: 31*15*14cm/12.2*5.91*5.51in
Application: It is suitable for the round cap with a diameter of 10-50mm/0.39-1.96inch.
How to Install
1. Unscrew the upper cover.
2. Install the si-li-cone ru-bb-er ring.
3. Tighten the upper cover.
4. Insert the head of an electric screwdriver into the cover hole.
5. Tighten the screws to secure the cover.
6. Installation is complete.
Package Included
1* Handle Capping Machine
4* Si-li-cone Rings
2* Aluminum Capping Heads
1* Spring Balancer
All Accessories for Use
Notes
1.Before using the machine, please select a suitable capping head, then adjust the tolerance and torque adjuster of the capping head position to meet the capping strength. Finally check all the screws of the machine to ensure that they are not loose and tighten them with a tool if loose.
2. Keep other products away from the machine, to avoid stopping the machine move.
3. After use, please turn off the power to avoid other trouble.
- 💗【Making Material】Mainly make by aluminum, iron and si-li-cone material, the surface is plated, durable and will not rust to ensure a long service life.
- 💗【High Efficiency】Using high quality motor, smooth running and low noise when using, idling speed: 9000R/Min. it has powerful torque, which can make it easier for you to tighten and loosen the bottle caps. Depending on your proficiency, it can screw 20 to 50 caps per minute and is suitable for semi-automatic assembly lines.
- 💗【About Operation】You just need to press the switch on the capping machine to start working. After tightening the caps, the machine will stop working when the hand is released. The machine is equipped with a knob to adjust the direction of spin, which can be used to both tighten and unscrew bottle caps.
- 💗【Quality Accessories】It is equipped with iron spring balancer, which has strong load-bearing capacity and good stability. It is used to hang the capping machine, easy to pick up and use. Equipped with 4 different sizes of si-li-cone rings, the soft material can effectively prevent damage to the cap, and can be used to tighten different caps sizes flexibly according to the need.
- 💗【Applicable Scope】Our capping machine adopts pneumatic capping working method, comfortable to grip and can work for a long time. Suitable for round caps with a diameter of 10-50mm/0.39-1.96in, and the applicable bottle height is not limited.
