DC62D Generator Set Controller for Diesel/Gas Genset Parameters Monitoring

Features:
* This series of controllers is dedicated to the start, stop, parameter monitoring, fault check and data setting of diesel/gasoline/gas generator sets.
* The controller adopts a 4.3-inch color LCD display and a new UI design, which can intuitively display related faults.
* All parameters can be displayed through analog indicator lights and text. In addition, the LCD display can display various faults at the same time. Once the generator cannot operate normally, the generator set will stop running.
* Provide Chinese and English interface selection, and more languages can be set according to user needs.
* All parameters can be configured through the buttons on the front panel, and can also be adjusted through the PC through the RS485 or USB programmable interface, which is widely used in the automation control of various generator sets.
* Adopt 32-bit microprocessor technology.
* 4.3-inch TFT color large-screen LCD display, language interface optional (Chinese/English), user language can be set as needed.


* The sensor can be for customized through the front button or PC software.
* Applicable to three-phase four-wire, single-phase two-wire, two-phase three-wire (120V/240V, 50/60HZ)
* Various crankshaft states (speed, frequency, oil pressure) can be set.
* Control and protection: automatic start and stop of the generator set, load transfer (for ATS control), and complete fault display and protection functions.
* Waterproof rubber gasket as standard. Waterproof grade up to IP54.
* Modular design: All connections use European connectors, which are easier to install, connect, maintain and replace.

Parameter display:
Engine speed
Hydraulic pressure
Engine water temperature
Engine fuel temperature
Engine cylinder temperature
Engine tank temperature
Engine oil level
Engine battery voltage
Charging voltage
Power frequency (DC62D only)
Mains phase voltage L-N (DC62D only)
Mains phase voltage L-L (DC62D only)

Level 3 maintenance indication

Specifications:
Part name: Generator set controller
Material: ABS, metal
Color: black
Working voltage: DC8V----36V continuous
Power consumption;
Standby: 24V: maximum 1W
Working: 24V: maximum 5W
AC voltage input:
Single-phase 2-wire 30VAC-276VAC(Phase-N)
Two-phase 3-wire 30VAC-276VAC(Phase-N)
Three-phase 4-wire 30VAC-276VAC(Phase-N)
Speed sensor frequency: 200-10000Hz
Maximum cumulative time: 99999.9 hours (minimum storage time: 6 minutes)
Fuel relay output: 16Amp DC+VE power supply voltage
Start relay output: 16Amp DC+VE power supply voltage
Programmable relay output: 5Amp DC+VE power supply voltage
Programmable relay output 2: 5Amp non-contact normally open normally closed output
Programmable relay output 3: 5Amp non-contact normally open output
Programmable relay output 4: 5Amp non-contact normally open output
Excitation output: Maximum 1Amp DC+VE power supply voltage
Digital input: Available when connected to battery
Working environment: -20-65 degrees Celsius
Storage environment: -40-85 Celsius
Protection level: IP54, when waterproof rubber pad is added between controller and panel
Size: 210mm*160mm*50mm
Panel opening: 186mm*142mm
Weight: 0.9kg

Package contents:
1 x DC62D generator controller
1 x accessory bag
1 x instruction manual

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.