30/60/80cm Acrylic Hot Bending Machine, Acrylic Bender For Plastic Plates PVC Organic Board Bending Device With Heating Wire ,Sturdy and Durable

Precautions for use

1. Before use, please check if there are any foreign objects covering the heating tank and remove any slag or similar foreign objects from the heating tank

2. Connect the power to the cooling water pump and ensure that the water circulation is normal. Do not dry up

3. Turn on the heating power and slowly adjust the temperature regulating power knob to the maximum scale. After the electric heating wire turns red, adjust the knob back to the appropriate scale.

4. To save electricity and ensure safety, please un the heating power after not using it for more than 3 minutes.

5. Sufficient cooling water should be prepared, and the cooling water temperature should not exceed 6t. Excessive water temperature can damage the heater and affect the heat bending effect. When the water temperature exceeds 65 , the water pump will automatically stop working. After the water temperature drops to the appropriate temperature, the water pump will start again.

6. After use, first un the heating power broadcasting head, and after 3 minutes (wait for the water temperature to drop slightly), then un the water pump power broadcasting head

7. When not using this device for a long time, please put the accessories into the accessory box to ensure that the accessories can be found smoothly when used again.

When working, the heating tank is in a high-temperature area, be careful of burns!

Extra Services : Heat Treating

Material / Metal Processed : Acrylic

Power : HYDRAULIC

Material : Sheet / Plate Rolling

Related Products:bending machine,dobladora de metal,metal bending tool,bender,sheet metal bender,wire bender