What is this? ANL Fuse Holder is a high-current circuit protection device designed for automotive, marine (boat), ATV, trailer, and high-power audio/video systems. IT prevent electrical overloads, short circuits, and overheating in circuits using 1/0/2/4-gauge wires. Its primary role is to protect sensitive equipment (e.g., inverters, battery chargers) and wiring by interrupting excessive current flow, thereby preventing fire hazards and equipment damage.
What will I get? Rated voltage:32 V;
Current:250 A;
Fuse Size: 80x19 mm / 3.15x0.75 inch (LxW);
Fuse Holder Size: 155x37x38 mm / 6.1x1.46x1.5 inch (LxWxH);
Installation hole diameter: 7.8x5.8 mm / 0.31x0.23 inch(LxW); Hole distance: 136 mm / 5.35 inch;
Side hole inner diameter:20 mm / 0.79 inch;
Fuse holder bolt: M8*1.25, which is the size of commonly used terminals.
Package includes:
2 Set x Fuse Holder + Fuse;
Is there any advantages of the product? ANL fuses are made of alloy and brass copper materials, with minimal resistance, high conductivity, corrosion resistance, and heat-resistant materials to prevent melting at high temperatures; equipped with a transparent protective non-conductive resistor cover, the fuse status can be visually checked without removal; ANL fuse's unique swing-out fork bolt design allows fuse replacement without removing fasteners.
How to use it? Quick-change fuses: Replace fuses without removing fasteners or disconnecting wires.
step 1:Loosen the nut;
step 2:Swing out "N" side;
step 3:Draw out the "A" side;
After replacing the fuse, tighten the screws and install the plastic box.
What should I notice? Secure the holder tightly to prevent vibration damage.Ensure wires are properly crimped/terminated to avoid arcing or heat buildup.
WARNING: 