LANFENG 3D Printed Electronic Hourglass, 2024 New 3D Digital Hourglass, Electronic Timer, LED Electronic 3D-Printed Hourglass with Gravity Sensor, for a Different Timing Experience (Blue)

Product Description

Operating Instructions 1:

Press and hold the power button for 3 seconds to turn on/off.

There are three buttons on the back of the Timer, '+', 'model', and '-'. The 'model' button is used to enter the time setting and start timing.

The '+' and '-' buttons are used in the time setting to increase or decrease the timing, in minutes.

During the Timer timing process, you can also adjust the brightness of the Timers.

Operating Instructions 2:

After power on, the hourglass enters the standby interface, press the "Model" button to enter the time setting interface.

In the time setting interface, press "+" or "-" button.

The screen will display 0-30, indicating that the timer's timing period is set to 1-30 minutes.

After selecting the desired time, press the "model" key to start the timer.

Specification:

Size: 3.82*2.17*0.87 inches

Color: Red/Blue/Green/Yellow

: plastic + electronic

Warm Tips:

1) Due to the light and screen difference, the item's color may be slightly different from the pictures.

2) Please allow slight dimension difference due to different manual measurement.

3) If you have any questions or have problems with the products you received, please contact in time.