Handheld Cordless Petrol Chain Saw, Gas Powered Chainsaw, 60cc Gasoline Chainsaw Power Head for Garden Pruning, Forest Logging, Chopping Wood

Description

Selected materials, excellent performance and powerful engine make this gas chainsaw  an efficient professional cutting tool, which saves you time and labor. With silent and vibration-dampening design, an ergonomic handle, a braking baffle, and a pull-start ignition method, it is safe and comfortable to use.

Application

It is suitable for garden pruning, forest logging, chopping wood, bamboo harvesting, timber making, ice cutting, tree pruning, clearing land, preparing firewood or cleaning up, outdoor wood cutting, for home, garden, ranch, and farm use.

How to Assemble the Chainsaw

1. Install the jam teeth in the right direction.

2. Install the guide bar.

3. Install the chain.

4. Cover the side cover.

5. Adjust the chain tightness.

6. Tighten the screw.

How to Start the Chainsaw

1. Push the brake.

2. Move the On/Off switch to the On position.

3. Pull the choke knob fully out to position.

4. Pull the start handle(Max 6 times).

5. Push the choke knob back fully.

6. Pull the starter until the engine start.

Specification

Color: Orange

Style: Modern

Assembly Required: Yes

Material: Nylon, Mn Steel, Aluminum

Engine Type: Single Cylinder, Air-cooled, 2-Stroke

Ignition System: Self-reset Pull Start

Fuel Tank Capacity: 550ml/18.6Oz

Chain Fuel Tank Capacity: 140ml/4.73Oz

Bore: 45.2mm/1.78inch

Volume: 116dB

Power: 2.8kw

Speed: 10000rpm

Displacement: 60cc

Oil Mixture: 25:1(90# Gasoline: Oil)  

Max. Cutting Diameter: 55cm/22in

Chain Length: 55cm/22inch

Product Size: 96*24*29cm/37.79*9.44*11.41in

Package Size: 60*27*33cm/23.6*10.6*13in

Gross Weight: 8kg/17.64lb

Package Included

1* Gas Chainsaw

1* Chain

1* Guide Plate

1* Tool Bag

1 Pair*Glooves

1 Pair*Goggles

1*Ear Protector

1* English Manual

Other Accessories for Assembly

Notes

1. Before starting the gasoline chainsaw, please ensure that it fits well with the guide bar, and use a wrench to adjust the chain. When installing the guide bar, please note that the screw column on the side cover must be aligned with the guide bar hole before installation(The function of the screw column is to adjust the chain tightness.).

2. Please use gasoline 90# with special 2-cycle engine oil and never use pure gasoline. Gasoline and oil mixture ratio: 25:1. The oil output can be controlled to turn larger to the left and smaller to the right.

3. Please note that after the first ignition sound, closing the choke and repeatedly pulling the start handle will suck in too much fuel and prevent the engine from starting.  

4. If the choke knob is not fully pushed back after pulling the starter handle up to 6 times, the engine preheating may be missed. Too much fuel will flow out and submerge the spark plug. Then you can't start the chainsaw. The damper is used to regulate air intake. When the engine is cold or not used for a long time, the damper needs to be pulled. If the engine is hot, it can be started directly. This is the same as the principle of starting a motorcycle! Close the damper, pull the start handle again 1-3 times to start it, and then you can use it normally.

5. Please pay attention to the tightness of the chain during installation (Pull the chain by hand. The distance between the chain and the guide plate is 0.12-0.2 inches.), otherwise, it will affect the use effect.