The PET tape is made of polyester film, which is resistant to high temperature for a long time, and the working baking temperature is as high as 200°C-220°C(392°F-428°F). After baking, there is no residual glue, no warping, no shrinkage, and no falling off. The high-temperature tape has good heat resistance, insulation performance and acid and alkali resistance, which is suitable for use in PCB, STM high-temperature protection, electrical insulation, and corrosive material environments. The heat resistant tape adopts a single-sided strong adhesive design and can be easily applied to various surfaces without additional adhesives or tapes. It is convenient for use in painting, welding or other high temperature environments. The PET silicone high temperature tape can be used for shielding protection such as splicing, painting, baking, electroplating, etc. It is used for high temperature baking, electronic product bonding, circuit board welding, 3D printing, PCB board high temperature shielding, aluminum anodizing, etc. Notice: Please ensure that the product is used within the high temperature range specified by the product, and avoid exceeding its heat resistance limit to avoid affecting the stickiness and performance. Before attaching, please ensure that the surface is clean, flat, dust-free, oily or wet to ensure the stickiness and stability. When using, be careful to peel gently to avoid pulling too hard to cause surface damage or residual glue marks. It is recommended to store in a cool and dry place, avoid moisture or direct sunlight to ensure the quality of the tape and the long-lasting stability of the stickiness.
WARNING: 