Barbed 1/4" Tubing Tee For Drip Irrigation Systems-10 pack

Use this Barb Tubing Tee insert fitting to connect three sections of tubing together. Quality barbed acetal fittings provide high retention in low-pressure poly tubing for long-term reliability of connections. These fittings can be confidently installed without clamps when matched with our quality low-pressure poly tubing with corresponding dimensions. **Features:** * Sharp-edged barbs create leak-proof seal * Increased strength and superior quality * Heat, chemical and wear-resistant * UV stabilized materials for long life **Special Note:** 1/4" barbed fittings have the unique ability to be "snapped" into larger tubing after punching a hole into the side of the larger tubing with any of our 1/4" punch tools. This creates a water-tight seal and allows you to "tee-off" of larger diameter tubing using only 1/4" fittings and a hole punch. **Fitting Size** **Acceptable Inside Tubing Diameter** **Fitting Use** **Max Operating Pressure** 1/8" .125" To connect sections of 1/8" tubing or to connect 1/8" tubing to mainline tubing Up to 30 PSI 1/4" .170" To connect sections of 1/4" tubing or to connect 1/4" tubing to mainline tubing Up to 30 PSI 1/2" .570" to .620" To connect sections of 1/2" poly tubing together Up to 30 PSI 3/4" .805" to .820" To connect sections of 3/4" poly tubing together Up to 50 PSI 1" 1.20" To connect sections of 1" poly tubing together up to 50 PSI