Wildnix Gas Powered T-Post Driver, 1000W Power, 7000r/min Speed, 32.7cc Two-Stroke Engine, 1700-2230BPM Impact Frequency, 0.24gal Fuel Tank, Efficient and Durable

Good tools are indispensable to complicated piling operations. The high-quality materials make this pile driver lay a foundation for your long-term use. The 32.7cc two-stroke engine can greatly improve your pile driving efficiency. The low fuel consumption rate can save you costs. With it, you can completely say goodbye to the traditional piling method and work more easily. Details Safety Lock: It prevents unnecessary injuries caused by accidental switching on. Proportioning Pot: It helps you to mix the right proportion of oil and petrol to keep your engine in good working condition. Practical Air Filter: It can filter out impurities in time, avoid blocking and ensure smooth operation. Two Sleeves: Two sleeves of different sizes allow wider application, and the threaded connection is also convenient for you to replace. Ergonomic Handle: It is comfortable, anti-slip, and shock-absorbing, effectively reducing fatigue during work. Flexible Throttle Switch: It allows you to freely control the speed of pile driving. Application It is suitable for a range of piling projects in gardening, road fencing, agricultural fencing, orchard support, geophysical exploration, construction, vegetable planting, fence protection, etc.Specifications Model: Jh-55 Material: ABS, Iron, Aluminum, Alloy Steel Color: Red, Black Power Source: Gasoline Powered Starter System: Hand Pull Start Engine Type: Single Cylinder, Air Cooling, 2-Stroke Impact Frequency: 1700-2230BPM Impact Energy: 25-50J Fuel: Oil Mixture (Gasoline:2-Stoke Engine Oil=25:1) Fuel Capacity: 0.9L/0.24gal Fuel Consumotion Rate: ≤0.5L/h(0.13gal/h) Displacement: 32.7cc Max. Power and Speed: 1000W/7000r/min Max. Torque and Speed: 1 .45N.m/5300r/min Pile Head Size: φ55mm/2.16in(Small), φ70mm/27.56in(Big) Product Size: 32*28*54cm/12.6*11*21.26in Packing Size: 64.5*34*37cm/25.4*13.4*14.6in Net Weight: 16kg/35.3lbs Gross Weight: 17.5kg/38.6lbsPackage Included 1* Pile Driver 1*Proportioning Pot 1* English Manual 2* Sleeves 1* Conversion Head 1* Chisel 1* Funnel All Accessories for InstallationNotes 1.The carburetor must be cleaned after every 100 hours of operation. The air filter sponge must be cleaned after 36 hours of operation. 2.Before use, please carefully read the English manual and follow the precautions. 3.If not used for a long time, the fuel and oil must be cleaned out of the tank and packed in a plastic bag to avoid dust and moisture entering the machine and affecting its use. 4.Pay attention to whether the oil inlet pipe is full of oil before use. 5.After starting up, you need to empty the throttle and let the machine start for a while before starting work. 6.When starting the product, please pull the starter quickly and continuously without stopping, and do not pull too hard. 7.Please note that this product cannot be used for piling in water. 8.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.