2 PCS Pop Up Electrical Outlet, 125V 4000W Gold Hidden Sockets 4.8A Water-Proof Power Socke with 2 USB Interfaces Receptacle Outlet for Rooms Offices

This product can be widely used in study rooms, offices, living rooms, conference rooms, lecture halls, exhibition halls, and other places. It can be installed on hardwood, carpets, tiles, granite, marble floors, etc.

How to Install

• 1. Use 2 M3 screws (included) to secure the plastic protective cover to the bottom box to prevent concrete or other objects from falling in.
• 2. When pouring cement, please first place the box in the designated position. Introduce the wires to be installed into it and reserve a minimum of 7.87 inches. The minimum distance between the box and the ground is 0.79-1.77 inches.
• 3. After pouring cement, the plastic protective cover can be removed.
• 4. Connect the wire to the socket.
• 5. Open the cover plate of the ground socket to expose the screw holes, and use 2 M3 screws to fix the socket to the bottom box.

Specification

• Pop-up Angle: 45°
• Rated Current: 20A
• USB Output Current: 4.8A
• Rated Power: 4000W
• Voltage: 125V
• Protection Level: IP44
• Bottom Box Size: 100*100*80mm/3.94*3.94*3.15in
• Panel Size: 120*120mm/4.72*4.72in
• Package Size: 25*12.5*10cm/9.84*4.92*3.94in
• Gross Weight: 1.8kg/3.97lbs
• Net Weight: 1.65kg/3.64lbs
• Package Included
• 2 * Pop-Up Floor Sockets
• 2 * English Manuals
• Other Accessories for Installation

Notes

• Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
• This product cannot be installed in bathrooms and kitchens with high humidity, where electrical appliances are concentrated, and where leakage accidents are prone to occur.
• This product is suitable for floors with a thickness of 3.15 inches or more. After installation, the sealing ring (included) needs to be tightly attached to the ground.
• To avoid the risk of fire, electric shock, and/or death, please turn off the power to the circuit breaker or fuse. Before wiring, it is necessary to test whether the power has been turned off.
• This product must be installed and used according to local electrical codes and regulations. This product is recommended to be installed by qualified electricians.
• Please pay attention to the orientation of the product during installation. This product can only be installed on the ground.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.