45°Cutting Angle Punch Angle Cutting and Punching Machine for Woodworking

Description:
The 45° corner cutting and punching integrated machine can complete the corner cutting and punching action in one go, making the operation more convenient and efficient. The 45 degree drilling machine is equipped with a pure copper 1.5 kW motor, an all aluminum integrated motor tray, linear square rail bearing inserts, high-quality adjustable drill bags, precise digital feed counters, and a waterproof and fireproof thickened tabletop.
The 45 degree angle cutting machine adopts a pure copper motor with high speed, and the saw blade adopts an 8-inch alloy saw blade controlled by a pneumatic system, which has good processing effect, stable and smooth cutting speed.

Suitable scope: Wood, aluminum, PVC vacuum formed door frames, photo frames, and all processes that require corner cutting and punching work.

Note: The saw blade provided with the machine is suitable for wood. If you need to cut other materials, please replace the corresponding saw blade yourself.

Parameter:
Rated voltage: 220V
Motor power: 1.5kw
Number of spindles: 2
Maximum drilling depth: 5-40mm
Maximum sawing thickness: 45mm
Drilling thickness: 5-50mm
Two hole adjustable center: 18-90mm
Air pressure: 0.6-0.8Mpa

Precautions For Use
1.Before operation, check whether the power cable is properly connected, whether the protective device and the pressing device are complete, and whether the components are normal.
2.The operating position should be bright and without shadow.
3.The drill should be centered, balanced and sharp.
4.This machine is mainly used for wood punching processing(thin aluminum can also be), and the selection of materials can not have nails, screws and other tools damaged or blunt foreign bodies.)
5.Hands should not touch the rotating parts of the machine tool during operation, and the wood chips should not be removed during operation. The power supply must be cut off before adjusting or removing the wood chips, and can only be carried out after the machine tool stops working.
6.Stop the machine immediately if anything abnormal is found.

Item included(027354):
Techtongda 45° Cutting Angle Punch For Woodworking