Wilwood 140-11291-R D52 Front 2-Piston Caliper Upgrade Kit, Red, Fits 1968-1996 GM Vehicles With 0.81" - 1.04" OE Rotor Width

Wilwood's D52 Front Caliper Kit from Accesspeed is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line mounting. Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.00” piston provide 6.28 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations. Vehicles 1978 & Up (with M10-1.5 banjo bolts) will require new Wilwood Flexline brake lines. See links below for length options. Click on each link to verify your vehicle brake line fittings. For 14" Kit Order # WIL-220-11371. For 16" Kit Order # WIL-220-11372. For 18" Order Kit # WIL-220-11373. For 22" Order Kit # WIL-220-11719. For 24" Order Kit # WIL-220-15868