Flushable Prefilter, Water Filter, Reusable and Flushable Pre-Filtration System Pre-filter 8.27*3.39 in Copper 316 Stainless Steel PC

Description

Look at our pre-filter. It is designed to trap impurities before water enters to a finer whole-house water filtration system, taking control of your water quality. It elevates your water experience to new heights, free from worries of contaminants and clogged appliances. With it, you can embrace a future where convenience, safety, and well-being are within your grasp.

Details 

Pressure Gauge: It shows the water pressure in real time.

Smooth Edges: The smooth and burr-free edges enhance the beauty of the product and better care for your skin when installing and cleaning it.     

Application

It protects and extends the life of your standard filters by removing the large dirt, sand, and rust particles before they reach the rest of your plumbing system, including water softeners, water filtration, water purifiers, water heaters, wall-hung boilers, washing machines, shower heads, and expensive appliances.   

Specification

Material: 58-3 Environmentally Friendly Copper, 316 Stainless Steel, PC

Color: Clear, Coppery, Blue

Process: Copper Precision Processing

Assembly Required: Yes

Applicable Water Pressure: 0.1-0.8MPa

Applicable Temperature Range: 0-60°C/32-140°F

Daily Processing Capacity: 32L/8.45Gal

Water Outlet Mode: Single Outlet

Water Production Capacity: 3T/792.52Gal /H

Pressure Range: 1-20bar/14.5-290.1PSI

Pressure Loss: 0.5bar/7.25PSI

Filtration Precision: 40μm

Interface Internal Thread Size: 19.05mm/0.75in

Interface External Thread Size: 32mm/1.26in

Installation Height above Ground: 10cm/3.94in

Product Size(L*W): 21*8.6cm/8.27*3.39 in

Package Size: 27*15*9cm/10.63*5.91*3.54in

Gross Weight: 0.95kg/2.09 lbs

Package Included

1* Pre-filter

1* Pressure Gauge

1* English Manual

All Accessories for Use

Notes 

1. Please do not use it for wastewater or corrosive liquid.

2. Please check that the direction of the water flow marked on the product body is consistent with the flow direction of the water pipe.

3. Please note that this product comes with 1.26in interfaces and 0.98in connectors. If you need 0.79in connectors or 0.79in PPR Live connectors, please purchase by yourself.

4. Please note that all installation, testing, and maintenance should be carried out by professionals.

5. Please note that this product is suitable for indoor use only.

6. If the contaminants in your water are too many or too large, we recommend you choose a larger micron filter or larger spin-down sediment water filtration. Please install it 3.94in from the ground.

7. It is recommended that the cycle of backwashing is 15-30 days, just open the drain valve for at least 30 seconds to self-flush and clean the whole system to ensure the filtering effect.

8. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.

9. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.