JVCC DC-PETF35-R Double-Sided Red Polyester Film Tape: 1/2 in x 60 yds. (Red)

JVCC DC-PETF35-R Double-Sided Polyester Film Tape is an opaque red polyester film coated on both sides (AKA double-coated) with an aggressive high-performance clear acrylic adhesive. This double-sided tape is used for splicing paper, corrugated paper, plastics, films, foils, low/high energy surfaces, and other continuous web processes when a visual splice is critical. The tape has high tack, adhesion and shear strength and also has excellent low and high-temperature resistance. The tape comes on a white siliconized paper release liner. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: polyester (PET) film
- Adhesive: solvent-based acrylic adhesive
- Release Liner: white siliconized paper
- Thickness: 3.5 mils (carrier, adhesive) 0.5 mils (carrier) 3.2 mils (liner)
- Adhesion: 95 ounces per inch (to stainless steel test panel)
- Tensile Strength: 7.5 pounds per inch (longitudinal)
- Application Temperature: 50F (minimum)
- Service/Operating Temperature: -40F to 225F
- Elongation: 100 %