Clearance! Universal Cloning Electric Gate Door Garage Remote Control Key Fob 433mhz Cloner T7A1

Instructions for use
01 Clear code first
Press and hold the above two buttons simultaneously (such as off/on) until the indicator light flashes 3 times, then release either button and continuously press it 3 times (while keeping the other button pressed). At this time, the indicator light enters a fast flashing state to indicate successful code clearing. (After successfully clearing the code, short press the button to indicate that the indicator light does not light up) indicates successful data clearing.
02 Copy pairing
One hand holds the original remote control, and the other hand holds the copy remote control. The two remote controls are pressed closely together, and the required copy buttons are pressed. The LED indicator light flashes twice and quickly flashes three times before entering a constant light state, indicating that the copy was successful. Follow this method to pair the other buttons one by one.
How to recover after clearing the wrong code?
Simultaneously pressing and holding the two buttons behind the copy remote control until the indicator light flashes quickly can restore the previously cleared remote control code. (This method is only effective if the remote control code is accidentally cleared and no copy operation is performed.)
Main technical indicators:
Working voltage: DC12V
Working current: ≤ 12MA
Working frequency: 433.92MHZ/868MHZ and other selectable frequencies
Transmission power: ≥ 10MW
Launch distance: 100 meters (open)
Frequency deviation: ± 0.2MHZ
Transmission rate: 50-60KHZ
Oscillating resistor: according to customer needs
Working chip: Latest copy chip (ultra long fixed code can also be copied)
Working temperature: -20 ° C~70 ° C
Storage temperature: -10 ° C~50 ° C
Humidity: below 85%
Packaging includes
1 * Copy remote control