Eco Sensors C-21 VOC Gas Monitor

For paint shops, printers, dry cleaners, woodworkers, vehicle repair facilities, chemical production areas and wherever indoor air quality monitoring is required - the Eco Sensors Model C-21 gas sensor helps you comply with the new VOC air quality regulations for hydrocarbon gases and solvent vapors.

• Constantly monitors your work environment
• Detects leaks and poor air quality before they are a health hazard
• Alarms below OSHA TLV for most common solvent-based VOCs
• No installation. Easily used and understood by non-technical personnel
• Virtually no maintenance
• Highly sensitive to solvent vapors and other VOCs
• Bright green-yellow-red display clearly shows hazard level of gas or vapor
• Detects down to OSHA, EPA, and other regulatory-mandated levels. typically at low ppm concentrations
• Has built-in rechargeable battery for portable use in tracking leaks
• Rugged construction with many safety

• Range - Full scale - 50-100 ppm for most solvent based VOCs
• Bargraph display - Green - normal, Yellow - caution, Red - danger
• Response time - Within a few seconds of the VOC gas reaching the sensor
• Measurement principle - HMOS (heated metal oxide semiconductor) sensor
• Power requirements - 12 VDC at 300 mA
• Battery - Self-contained Ni-Cad or NiMH, Recharged by AC adapter overnight
• Dimensions - 3.25 x 2.38 x 1.38 in.