Tivlon 4-In-1 Multifunctional Brush Cleaner,Cosmetic Brush Cleaner for Manual Cleaning Mode & Automatic Mode,Electric Makeup Brush Cleaner.White

Specification
Name: Cosmetics Brush Cleaner
Type: HZ-001
Voltage: 5V
Rated Power: 8W
Rated Current: 1.5A
Material: ABS PC TPE
Rotational Speed: 7000 rpm
Product Weight: 260g
Box Size: 95x95x170mm

MANUAL CLEANING MODE：

• Handheld Cleaning
  For a thorough cleaning of your makeup brush, fill the device halfway with clean water and add the appropriate amount of cleansing solution. Turn on the device and gently rub the brush bristles back and forth against the grooves at the bottom of the container. This method provides the most effective cleaning as it penetrates deep into the brush. Once finished, dry the brush and store it properly.

AUTOMATIC MODE：

• Hands-free Cleaning
  To use automatic cleaning, fill the device to level indicated with clean and add the appropriate amount of cleansing solution. Insert 3-4 brush into the brush holder. This method is best suited for brushes that are relatively easy to clean, such as dry powder brushes. Once you have everything set up, release both hands and let the cleaning process begin. Once finished, dry the brush and store it properly.

Please follow the instructions below to ensure optimal use of your device:
- Make sure to use the 5V2A adapter plug to avoid any operational issues.
- If the machine stops working and the light starts flashing, stop using it for 15 minutes and then try again.
- While washing the brushes, do not exceed four brushes at a time. It is recommended to wash only 2-3 brushes at once.
- Do not fill water beyond the indicated water level.
- For brushes that are difficult to clean, such as wet powder and primer, add cleaning liquid and rub the bottom lines with a single hand to achieve a cleaning effect. You can reduce the amount of water if needed.
- To clean a short brush, remove the cover and wash it on manual cleaning mode.

HOW TO USE：

• Manual/Handheld Cleaning:
  Step 1: Connect the USB adapter to a power source that is above 5v2A.
  Step 2: Pour clean water into the device without exceeding the water level.
  Step 3: Add an appropriate amount of cleaning liquid to the water.
  Step 4: Rub the brush and scrub the bottom of the container thoroughly.
  Step 5: Rinse the brush with water.
  Step 6: Absorb any remaining water with a dry cloth.
  Step 7: Place the brush head upwards and let it air dry naturally.
  Step 8: After drying, place the brush head downwards for storage.
• Automatic/Hands-free Cleaning mode:
  Step 1: Connect the USB adapter to a power source that is above 5v2A.
  Step 2: Pour clean water into the device without exceeding the water level.
  Step 3: Add an appropriate amount of cleaning liquid to the water.
  Step 4: Insert 1-4 brushes at a time to be cleaned.
  Step 5: Press the Switch to Start.
  Step 6: Rinse the brush with water.
  Step 7: Absorb any remaining water with a dry cloth.
  Step 8: Place the brush head upwards and let it air dry naturally.
  Step 9: After drying, place the brush head downwards for storage.