TP-50 Professional Peristaltic Point Glue Machine Tube Dispensing Pen
Key item features
- After screwing off KNOB-A slightly, back CLAMP-A and insert TUBE.
- After aligning TUBE at the V-shape of CLAMP BASE, use CLAMP-A to advance it to lock KNOB-A with proper force.
- Pull one side of the TUBE to the side of CLAMP-B, and lock the TUBE GUIDE at one side. Then hang TUBE GUIDE HOLDER to lock.
- On CLAMP-B, pull the TUBE tight slightly and then use the same method of CLAMP-A to fix the TUBE.
- Rotate the ROTATOR for 5 times with hands in an anti-clockwise direction to tension the TUBE. (If the TUBE is loose, fix CLAMP-B to tension TUBE).
- After inserting the AC 110V plug into the socket, press the switch.
- Install TUBE.
- Set the condition for action.
- Set VACUUM ANGLE according to the operation content.
- Press FOOT SWITCH (FINGER SWITCH) to operate.
- Rotation direction: CW (clockwise direction), (Dispensing direction) CCW (anti-clockwise direction).
- Dispensing form:①Rotation angle: start the set angle② STEADY: start continuously running until the input signal ends.③ CONTI: when running stops at normal state, change to Rotation Angle and Steady mode.
- This product can be widely used in manufacturing factories and stores for shoe making (insole spraying, sponge wrapping), toys (bonding, fixation, insulation), packaging, small household appliances, wires, hardware, small accessories, handicrafts, hair clips, and electronic products. It is used for liquids and is mainly applied to household appliances, optics, mechanical hardware, electronic industry, electronic components and other fields.
- Color: Grey, Golden
- Model: TP-50
- Material: Iron and Aluminum
- Surface Treatment: Painted
- Style: Modern
- Power Source: Corded Electric
- Number of Sets: 1
- Shape: Rectangular
- Number of Items: 1
- Assembly Required: Yes
- Mount Type: Countertop
- Power Supply: AC 110V, 60 Hz
- Power: 10w
- Spitting Mode: Manual / Semi-automatic
- Rotor Revolution: 0-160RPM
- Timer: Dispensing Rotating Angle: 0-999°, Vacuum Rotating Angle: 1-999°
- Minimum Dispensing Amount: 0.0001cc (When Use Φ0.2* Φ0.7)
- Dispensing Viscosity: Below 5000cps, 0-1000CPS (Use Φ0.2*Φ0.7, Φ0.5*Φ1.0 Tube), 1000-5000CPS (Use Φ0.5* Φ1.0, Φ1.0*Φ1.5 Tube)
- Dissipated Power: 30VA
- Plug Type: US Standard
- Power Cord Length: About 1.1m/3.61ft
- Product Size:17.5*14*9cm/6.88*5.51*3.54in
Specs
BrandCNCEST
MaterialIron and Aluminum
Model nameTP-50
How do you want your item?
About this item
Product details
This glue dispensing machine is made of high-quality iron and aluminum, and adopts exquisite an spray painting process, ensuring a long service life. Its good performance and efficient work can make your work more time-saving and labor-saving. It will be your right-hand man on the job.
Key Features
Sturdy and Durable: Made of high-quality iron and aluminum with a paint spraying process, it is sturdy, wear-resistant, impact-resistant, and rustproof, so it can remain beautiful and practical for a long time.
Two Modes of Use: This product can either be dripped semi-automatically by the machine or precisely controlled by the hand switch. If you want to free your hands, you can set the switch to the automatic position for a more efficient way of working.
High Efficiency: With multiple dispensing rotating angles ( 0-999°), vacuum rotating angles(1-999°), 0-160RPM rotor revolution, and 5000CPS maximum viscosity, it can improve your work efficiency and save labor and cost.
High Safety: The uniform heat dissipation holes can reduce the temperature of the product during operation in time, thus avoiding potential safety hazards, and extending the service life of the product.
Convenient to Operate: With a simple structure, convenient switch, clear operation panel and indication, you can accurately operate the machine and control the adhesive amount with ease.
Easy to Clean: Its smooth surface and simple structure allow you to clean it with a soft towel and water.
Protective Packaging: The sponge and bubble bags can better protect your product during transportation and make it delivered to you completely to the greatest extent.
Ideal Gift: With its good performance, this product can be used as a gift for family or friends who need it, making their work more efficient.
Quality Service: We stand behind all our guests and look forward to assisting you with your purchase. It is our pleasure to answer your confusion and questions. The end of the story between us is definitely not "we sell and you buy".
Details
Four Support Feet: The sturdy four non-slip support feet can provide additional support and better maintain the stability of the product.
Round Corners: They can take care of your skin, thus improving the safety of use.
Package Included
1* Glue Dispenser Machine
1* Dispensing Pen
1* Power Cord
1* Foot Switch
1* Chinese Manual
All Accessories for Installation
Notes
Please note that faults occur when the terminals are connected to the power supply.
Please note that give out dispense signal at TIME MODE.
Please note that the signal of dispense ends signal will not be given out at STEADY or CONTINUOUS MODE.
Please note that the items with spot checks of 1-2 times weekly.
Please note that the supply oil to ROTOR ROLLER. If there is foreign matter or dirt on the ROLLER, use a clean cloth to wipe it.
Please note that the knife or file is not permitted to remove the foreign matter or file on the ROLLER. This may shorten the service life of TUBE and cause damage to ROLLER.
Please note that if the TUBE is found damaged or clinging to the ROLLER, it should be removed completely. Otherwise, this may be the reason for damage when installing a new TUBE.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
- After screwing off KNOB-A slightly, back CLAMP-A and insert TUBE.
- After aligning TUBE at the V-shape of CLAMP BASE, use CLAMP-A to advance it to lock KNOB-A with proper force.
- Pull one side of the TUBE to the side of CLAMP-B, and lock the TUBE GUIDE at one side. Then hang TUBE GUIDE HOLDER to lock.
- On CLAMP-B, pull the TUBE tight slightly and then use the same method of CLAMP-A to fix the TUBE.
- Rotate the ROTATOR for 5 times with hands in an anti-clockwise direction to tension the TUBE. (If the TUBE is loose, fix CLAMP-B to tension TUBE).
- After inserting the AC 110V plug into the socket, press the switch.
- Install TUBE.
- Set the condition for action.
- Set VACUUM ANGLE according to the operation content.
- Press FOOT SWITCH (FINGER SWITCH) to operate.
- Rotation direction: CW (clockwise direction), (Dispensing direction) CCW (anti-clockwise direction).
- Dispensing form:①Rotation angle: start the set angle② STEADY: start continuously running until the input signal ends.③ CONTI: when running stops at normal state, change to Rotation Angle and Steady mode.
- This product can be widely used in manufacturing factories and stores for shoe making (insole spraying, sponge wrapping), toys (bonding, fixation, insulation), packaging, small household appliances, wires, hardware, small accessories, handicrafts, hair clips, and electronic products. It is used for liquids and is mainly applied to household appliances, optics, mechanical hardware, electronic industry, electronic components and other fields.
- Color: Grey, Golden
- Model: TP-50
- Material: Iron and Aluminum
- Surface Treatment: Painted
- Style: Modern
- Power Source: Corded Electric
- Number of Sets: 1
- Shape: Rectangular
- Number of Items: 1
- Assembly Required: Yes
- Mount Type: Countertop
- Power Supply: AC 110V, 60 Hz
- Power: 10w
- Spitting Mode: Manual / Semi-automatic
- Rotor Revolution: 0-160RPM
- Timer: Dispensing Rotating Angle: 0-999°, Vacuum Rotating Angle: 1-999°
- Minimum Dispensing Amount: 0.0001cc (When Use Φ0.2* Φ0.7)
- Dispensing Viscosity: Below 5000cps, 0-1000CPS (Use Φ0.2*Φ0.7, Φ0.5*Φ1.0 Tube), 1000-5000CPS (Use Φ0.5* Φ1.0, Φ1.0*Φ1.5 Tube)
- Dissipated Power: 30VA
- Plug Type: US Standard
- Power Cord Length: About 1.1m/3.61ft
- Product Size:17.5*14*9cm/6.88*5.51*3.54in
