Square Shower Mat Non-Slip Bath Mat Anti-Mildew Shower Non-Slip Bath Mat with Drainage Holes, Anti-Bacterial Shower Insert 53 x 53 cm, Machine Washable, Green

Installation is easy. Check out what to do:

1, Unfold the bath mat and lay it flat for a while before using. Roll back the backing of the non slip bath mat to keep it flat. It is recommended to soak the mat in warm water for 10 minutes before first use to allow the bath mat to unfold flat.

2, The non-slip bathtub and floor must be kept clean and free from dirt, stains and oil stains. Do not use shower mats on textured surfaces as the suction cups will not attach properly according to the instructions.

3. Before filling the bathtub with water and starting the shower, wet the non-slip bathtub with some water and gently align the suction cups at the bottom with the center of the bathtub or the floor

4. Press the square shower mat with your hands to adsorb to the smooth bathtub.

5,Make sure at least 8-10 spots have been sucked properly. After installation, the bathroom mat is attached.

6, If the shower mat is still moving, repeat the above instructions or press a few more suction cups.

7, After each use, the bath mat must be rinsed. It can be machine washed and hung to dry. Do not use a dryer or radiator.

Recommendations:

1. Before use, Xiyunte recommends soaking the non-slip bath mat with warm water so that the suction cups can be better absorbed on the smooth floor and prevent slipping.

2, We recommend rinsing the shower anti-slip mat after each use and hanging it to dry to remove oily and greasy residues that may come from various soaps and hairdressing products. This can extend the life of the bathroom mat.