Travaco Marine-Tex Gluvit Hull & Deck Epoxy Sealer & Catalyst, 2 Lbs

Give your boat hull or deck a water-tight seal that flexes with your hulls movements with the Gluvit Epoxy Sealer by Marine-Tex. Gluvit barrier coat seals and protects hulls and decks. With this expoxy, you'll provide superior protection, seal leaky seams and rivets in aluminum hulls, and leaks around fiberglass cabins or decks. Hard protective coating flexes with hull movements to bridge and seal hairline cracks. Gluvit fills minor cracks and pinholes. Its long working time allows penetration into cracks to seal and strengthen. Its barrier coat to minimizes water absorption and galvanic corrosion. Simply renew deterioration with a few strokes. On wooden hulls, Gluvit seals and protects planks and sheeting against water absorption and damage from marine parasites. On aluminum hulls, Gluvit seals seams and rivets and acts as a barrier coat to minimize galvanic corrosion. For maximum ultraviolet protection, Gluvit must be painted after full cure. Gluvit can be overcoated with any marine paint or other coating compatible with epoxies. Check with your paint supplier and make sure the coating you are using is epoxy friendly and suitable for your application. Give your boat the upgraded seal it needs with Marine-Tex Gluvit Sealer.