Eaco Chem - NMD 80 - Remove Mortar and Efflorescence from Brick, Stone, Unpolished Granite + More! - 1 Gallon

Please note that price includes $54.25 shipping hazmat fee The #1 Specified New Masonry Detergent in North America! NMD 80 is a powerful detergent-based solution designed for safe and effective removal of mortar smears and efflorescence from masonry surfaces. It can be used on all masonry substrates including brick, stone, synthetic stone, precast concrete, designer or colored block. It works great to remove polymeric sand haze. The added buffering ingredients allow NMD 80 to be powerful yet safe enough for glass and anodized aluminum. NMD 80 is a masonry cleaner that requires no respirator when working outdoors, preventing unnecessary fines. This product is capable of extremely effective cleaning and efflorescence removal without brushing or scrubbing and will leave the cream on the mortar joints. Proper usage is essential to experience the great reductions that are possible in chemical costs and cleaning time. NMD 80 is designed to be used with the EC Jet downstream chemical injector to produce excellent cleaning results consistently, easily, and faster than ever before. Combine these cost reductions with heightened safety, excellent final appearance and a dramatic reduction in post cleaning stains and you have tomorrow’s chemistry today! For Use On: All masonry substrates including brick, stone, limestone, unpolished granite, natural stone, synthetic stone, precast concrete, designer or colored block. It works great to remove polymeric sand haze. Use to Remove: Mortar smears and efflorescence Product Details • Spray-on/rinse-off application increases production and reduces labor when applied through an ECJet • Will not harm most glass or anodized window frames when used as directed • Reduces water-in-wall issues, such as efflorescence • No respirator required when used outdoors (other safety precautions apply) • One cleaner for multiple substrates, which includes unpolished natural stone and cast stone. (see complete list under suitable substrates) • For use on vertical and horizontal surfaces • Effective way to remove large scale efflorescence • Biodegradable • Top down application allows more product coverage on lower elevations • Safe on most surfaces • Uses 80% less water. saves 90% more time • Spray on / spray off Coverage: 100-200 sq. ft. per gallon depending on the surface porosity, texture, ambient temperature, craftsmanship, severity of mortar smears, and severity of other post construction staining Dilutions NMD 80 is diluted 4 parts water to 1 part NMD 80. An EC Jet is recommended to ensure both proper dilution and application of NMD 80. Ideal size of pressure washer for exterior clean: gas powered ranging from 3 to 6 gallons per minute pressure washer not to exceed 3,000 P.S.I. For a clearer understanding of how to use an EC-Jet watch the video! Pre-Testing Always test prior to beginning full-scale cleaning operations. Pre-testing will determine suitability and effectiveness on each type of surface and stain designated to be cleaned. Pre-testing will also determine dwell times and number of applications required to achieve desired results. Pre-testing will show any potential or adverse reactions to adjacent surfaces. Allow test areas to thoroughly dry before evaluating final appearance and results Safety Information Always wear goggles and chemical resistant gloves when handling this product. Read the Safety Data Sheet for additional safety and health hazard information prior to use