Resolve High Traffic Carpet Foam, 22 oz Can (Pack of 2)

Details

• Safely Cleans and Deodorizes
• Protects against dirt
• Helps prevent future soils
• Makes carpet cleaning super easy!
• Made to clean large areas

Directions

Large Area Carpet Cleaning:
1. Shake can well. Hold can upside down about two feet above carpet. Spray foam evenly over a 3 foot square area. 2. Work the foam into the carpet in two directions using a damp, colorfast mop. 3. Repeat Steps one & two until the entire area is cleaned. 4. When dry, vacuum thoroughly to remove dried foam and loosen dirt.

For use in Resolve Easy Clean Pro Carpet Brush:
1 Remove spray cap from Resolve High Traffic Foam 22 oz can. Shake the can vigorously before each use. If the can is already in the gadget, remove and shake again. 2. Insert can into the gadget and rotate clockwise until it gently clicks into the locked position. 3. To remove the can, rotate counterclockwise into the unlocked position and gently pull upwards. 4. Pull trigger to dispense foam, then brush the foam into the carpet. When dry, vacuum thoroughly to remove dried foam and loosened dirt. 5. Replace spray cap to can for standard use.

Upholstery Cleaning:
1. Blot wet soils with a clean absorbent cloth. 2. Shake can well and generously apply directly to stain from a distance of four to six inches. Allow foam to absorb into stain for three minutes. 3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. DO NOT OVERWET FABRICS. (Hint: To avoid rings, clean entire section where soil occurs). 4. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use. 5. Only use spray cap to dispense foam for upholstery cleaning.