Zep Wet Look Floor Polish - 5 Gallon (1 Unit) ZUWLFF5G - Long-Lasting Glossy Finishing Polish for Vinyl (VCT), Concrete, and Tile Floors

We have a 10,000 sqft concrete shop floor. Every year or two we clean, strip, seal and finish our floors with these Zep products. The most important step is to mop the floor with clean water several times before laying down sealer and finish. We use the stripper with a floor scrubber, mop it up, then follow with another floor scrubber using the neutral cleaner, that way it gets up a of the stripper that gets dried out or flung around and missed. When applied carefully, you get a perfectly gloss finish. Also if you skip the sealer, you will see more imperfections in the base material. The sealer helps keep the concrete looking more uniformly wet. Also the best way to apply this product is with a wide microfiber mop such as the Rubbermaid Hygen Q570, Q424 and the telescoping angled handle. we used to use the rayon mop heads but they take longer and leave streaks. the streaks will dry out and be fine, but they wind up taking like 2 hours to fully dry between coats. Also there is really no difference between the wet look and high traffic. Or any other floor polish products like this. We have used different brand sealers and polishes and have had no issues between them.

I have 40 year old terrazo floors that lost their shine ages ago. My neighbors did crystallization. They had to move. I mean, they had to completely empty their house and it cost thousands of dollars. Their floors turned out beautifully, I must say. I came across your product and got the same shine for a fraction of the cost and it was incredibly easy to apply. If you can mop a floor, you can apply this product. Just be careful the floor is really clean, as dirt will get stuck to the floor. I'm wondering how long it will last. Thanks for a great product.