X-Pro Brand New Fiji 200 EFI Electronic Fuel Injection Moped Scooter with 13" Alloy Wheels

This is by far the best 860 dollars I've ever spent. This bike has a lot of great features for the money like two USB charging ports that charge really fast and so far there's been no issues at all with the bike. make sure to change the oil either immediately or within 300 miles and check the main assembly bolts for tightness as often as you can the first few hundred miles or so which should be fine if you used loc-tite. It came in a crate as advertised and assembly was easy until I got to the front tire which was hard by myself to get lined up in the disk brake and the axle while holding the tire up off the ground and keeping the front forks lined up. You will either need a small jack or another person to help get it off the pallet and on to its kickstand without damage to the front forks or front disk brake. Be careful taking apart the metal frame it's in can be sharp at the edges. once assembled it started first push of the button and ran perfect from that day till now a month later. I've put 500 miles on it already and it's got great power. I'm 275lbs and this bike accelerates up hills unless it's at top speed which btw it varies from road to road. Off highways it goes to 55mph quickly and will even get to 60 from time to time. Downhill and on the interstate it hits a top speed of 65mph. I would not recommend going that fast very long especially in the first few hundred miles. So all in all this bike is worth every penny. Make sure you use a little loc-tite on most of the bolts when assembling. Which if you didn't know was putting on a front tire, front windshield, slide the handle bars on and fasten with a single bolt and two cable ties to keep everything neat. Then there's a rear luggage bar, two rear shock bottom bolts, handle bar end caps(be very careful not to over tighten the throttle side otherwise the throttle will get stuck). Then there's the mirrors, rear license plate holder and lastly the battery and cover. Add gas and check for oil or change it and your good to go. Keep this bike maintained is the most important thing you can do. regular oil changes and lubing plus air filter and spark plug changes regularly at recommended intervals and you should be fine. Try to stay out of water as best as you can and regular cleaning of dust buildup with air or washing it as often as needed. I highly recommend this motor bike and the company has been great with sending the title and paperwork as well which came within days of receiving the bike.

**300 mile update** this is a nice scooter. I ride it to work when I can and it's breaking in very nicely. I changed the oil when I first got it and again at 300 miles. Im gonna change the oil again at 1000miles. I use 10w 40 motorcycle oil as I do with all my scooters. It will go 60 mph. I do believe it has a Governor on it because I can't go past 8000 rpms even though it says 10 on it plus it won't go past 60mph even though it feels like it can. Assembly was very easy and smooth took about an hour and 30 mins. There are videos on YouTube to help you. It's a smooth ride for the most part. The only thing I wish it had was a bigger storage compartment which doesn't really bother me anyway. Shipping was very fast and was a week early and the bill of sale came 5 days later in the mail. X-pro did a good job with this one I'm pleased with my purchase. The title will say 169cc even it says 200cc on the scooter. I'm getting about 75 mpg on this. Definitely fun to ride!