Wireless Routing Module RM20 Internet of Things Module Multi-Port Dual-Core Gigabit Switch Linux Development Module

1.RM20 is a high-performance Gigabit Ethernet module, using MT7981B+MT7531A chip solution, which can be used to build wireless routers, switches and other network equipment.
2. The SoC is manufactured using advanced silicon technology and integrates dual-core ARM -A53MPCore with an operating frequency of up to 1.3GHz and more DRAM bandwidth. Includes multiple peripherals, SGMII and USB3.O (host) ports.
3. It is suitable for home and small and medium-sized enterprise network environments to create high-speed and stable wireless and wired hybrid network solutions. It can also be applied to scenarios such as IoT gateways and edge computing nodes.
4. Multi-port Gigabit Ethernet module
5. Wireless routing module RM20 multi-port dual-core Gigabit IoT module with Linux development module

Description:
Hardware parameters
1.Hardware interface: UART/GPIO/PWM/SPI/I2C/USB
2. Working voltage: 3.3V
3. GPIO drive capability: Max:12mA
4. Working current: 700mA@3.3V (recommended power supply more than the 3A)
5. Storage capacity: DDR3 256M (2Gbit); Nand Flash: 128M (1Gbi)
Software parameters
1. Wireless mode: STA/AP/AP Client
2. Firmware upgrade: serial port upgrade/web page upgrade
3. Network protocol: IPV4, TCP/UDP
4. User configuration: web page configuration
5. Software environment: OpenWrt
Other parameters
1. Working temperature: -20℃-+80℃
2. Working humidity: 10%~90%RH (non-condensing)
3. Storage temperature: -40℃~+85°C
4. Storage humidity: 5%~90%RH (non-condensing)
Material: PCB
colour: As shown
Note: Depending on the batch, the appearance, color, and printing of the product , which does not affect use.

Package Contents:
1 x Digital Amplifier Board Module

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.