Uxcell 15CM 30W 12V Foam Cutting Pen, Electric Hot Foam Cutter Pen Cutting Machine Pen Tool Hand Held Engraver, Blue

The foam cutting pen can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for hand-made foam, small craft model making, advertising font production, DIY hand model making, etc.

Advantage
The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds.
Non-slip Insulating Rubber Handle: The lightweight heating pen with a non-slip rubber handle will let you not be tired after a long time of cutting work.
The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments. Suitable for cutting medium and low-density foam, pearl cotton, foam board, non-woven fabrics, woven bags, etc.

Instruction
Step1. Connect and switch on the power adapter.
Step2. Turn the switch on and wait for the temperature to rise to usage temperature.
Step3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut.
Step4. After cutting, turn off the switch and wait for the foam cutter to cool down.
Recommended to rest for more than half an hour after 30 minutes of use.

NOTE: 1. Please use it with a power adapter and pay attention to the DC plug size before ordering.
2. The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break. Foam cutters are generally used for hand-made foam. The working principle of the product is that after being powered on, it generates high temperature and then cuts the foam into the desired shape. It can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for small craft model making, advertising font production, DIY hand model making, etc.

Advantage
The foam cutter heats evenly and preheat quickly, and can be heated to 210°C within 10 seconds.
The non-slip insulating rubber handle design and the electric heating pen are lightweight, so your hands will not be tired after a long time of cutting work.
The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant, and can adapt to a variety of heating environments. Suitable for cutting medium and low density foam, pearl cotton, foam board, non-woven fabrics, woven bags, etc.

Instruction
Connect and switch on the power adapter.
Turn the switch on and wait for the temperature to rise to usage temperature.
Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut.
The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause break.
After cutting, turn off the switch and wait for the foam cutter to cool down.

NOTE: A single use is 30 minutes. It is recommended to rest for more than half an hour after 30 minutes of use. The cutter should not work for more than 3 hours a day.