Tail Lights Pair for 1999-2006 Chevy Silverado 1500 2500 3500 99-03 GMC Sierra Chrome Housing/Smoke Lens Tail Lights 1 Pair Rear Lamps Replacement

WHY We Need Upgrade TAIL LIGHTS?
In life, we must install lights for our cars, not only to illuminate the road, but also to communicate and remind each other. The function of the tail lamp is to show the existence of the vehicle to other road users, and the car will turn in a certain direction or is braking and decelerating, so as to attract special attention.
It is very important that as a car lover choosing a matching car lamp. The excellent light output, excellent design and structure, free return and good service, for a variety of reasons, you will not miss this some.

【Specifications】:

Bulb Type:
Brake / Running Lights - 3157
Turnning Lights - 3157
Backup Lights - 3157
Turn Signal Light -914
Bulbs NOT Included, please use the original light bulbs
Wiring Harness: NOT Included
Certification: DOT/SAE Compliance
Replaces Original (OE) Part #: 1999-2002: (L): 19169017; (R): 19169018; 2003-2006: (L): 19169004; (R): 19169005
Partslink Number: 1999-2002: (R): GM2801173; (L): GM2800186; 2003-2006: (R): GM2801174; (L): GM2800174;

【Vehicle Fitment】:

Chevrolet
1999-2006 Chevy Silverado 1500 /2500
2001-2006 Chevy Silverado 3500 /
2007 Chevy Silverado with Classic Body Style (NOT FIT other models)
GMC
1999-2002 GMC Sierra 1500 /2500
2001-2002 GMC Sierra 3500                    
Note: Do not fit Classic Body Style,Barn Door or Stepside models

How to Install
1. Open the box and inspect the item. Verify what was received was what you ordered and that the item is free from physical damage or defect.
2. Remove the old tail light. First thing you have to do is undo the mounting screws on the outside, if there’s any. You’ll have to open the trunk or any rear door or opening on the vehicle to access the back of the tail light. The wiring harness must be disengaged from the assembly through its back.
3. Once the wiring harness is out, you can now undo the mounting screws or nuts, whatever fastener is used. With no more screws or nuts holding it in place, you can push out the assembly from behind. Check if the tail light assembly you just removed is the same as the new one.
4. See if they have the same components, design, and fasteners to ensure proper fitting. Fix the new assembly into the tail light pocket. Once it’s fitted into place, secure it with the screws or nuts. Tighten them properly. You can now plug in the wiring harness that you removed earlier.
5. Test the new assembly. Switch on the tail lights to see if they work. If not, then some adjustments should be done to the newly installed tail light kit. Put back any cover, trim, or component that was removed to access the tail light assembly.

【Package Includes】:

1 Pair of Tail Lights (Left and Right Side)