Stanley Waterproof Epoxy Adhesive - Strong Bond, 0.85oz-12 Pack

Stanley Waterproof Epoxy Adhesive is a two-component, solvent-free, fast-curing, and strong multipurpose epoxy-based adhesive. This marine grade epoxy can be applied outside and then submerged underwater, making it ideal for a variety of applications. This waterproof epoxy putty does not shrink and is resistant to water and most common solvents. Perfect for both household and professional use, this marine grade adhesive ensures durable and reliable bonds in various conditions.

• High Lap Shear Strength: Ensures strong and durable bonds.
• Waterproof: Can cure underwater after being applied outside, making it an excellent epoxy waterproof solution.
• Fast Setting: Sets in 20 minutes.
• No Shrinkage: Cures without shrinkage and cracking.
• Versatile Application: Excellent gap-filling capability and resistant to water, chemicals, weather, and temperature variations.
• Easy to Use: Simple to mix and dispense, paintable and sandable after curing.

• Wood Bonding: Ideal for bonding wood and ensuring strong connections.
• Glass Bonding: Perfect for bonding glass, crystal, and other fragile materials.
• Ceramic and Porcelain Bonding: Suitable for use on ceramic and porcelain surfaces.
• Metal Bonding: Effective for bonding metal and ensuring durable repairs.
• Fiberglass Bonding: Suitable for use on fiberglass materials.
• Household Repairs: Ideal for repairing furniture and various household materials (not recommended for polyethylene, polypropylene, nylon, PTFE, or flexible plastics).
• Aquarium Adhesive: Ideal for use as an aquarium adhesive.
• Epoxy Glue Marine: Ideal as an epoxy glue marine for underwater applications.

• Safety Precautions: Ensure good ventilation at the work station. Wear personal protective equipment. Do not eat, drink, or smoke when using this product. Always wash hands after handling.
• Surface Preparation: Ensure surfaces are dry, clean, and free from oil, wax, and paint. For better bonding, slightly roughen surfaces with emery cloth or abrasive paper.
• Application: Remove the syringe tips, expel air bubbles, and dispense equal parts into a mixing tray. Mix thoroughly for one minute until a homogeneous mix is obtained. Apply the mixed adhesive to one surface and assemble parts immediately. Press together and hold for at least 20 minutes. Allow 4 hours before handling. Full strength is achieved after 24 hours at 68°F.
• Cleaning: Clean excess uncured adhesive with a clean cloth. Acetone or mineral spirits may assist in removal. Cured adhesive can only be removed mechanically.

Basis: Epoxy-based
Set Time: 15-20 minutes at 73.4°F
Handling Time: 4 hours at 73.4°F
Full Cure Time: 24 hours at 73.4°F
Application Temperature: Between +41°F and +77°F