Scotch Commercial-Grade Masking Tape for Production Painting 572353

Scotch Contractor Grade Masking Tape, .94 in x 60.1 yd (24 mm x 55 m), 1 Roll/Pack.

Scotch Contractor Grade Masking Tape is a general purpose masking tape designed for use on non-damageable surfaces. Use on vinyl, carpet, metal, and plastic for the protection you need to get the job done. Scotch Contractor Grade Masking Tape holds to surfaces for up to 3 days and then removes easily without leaving any sticky residue behind.

• USE-ON SURFACES: Designed for use on vinyl, carpet, metal, and plastic.
• DAYS CLEAN REMOVAL: 3-day interior and 1-day exterior clean removal leaves behind no damage or sticky residue.
• ADHESIVE LEVEL: Strong.
• Size: 0.94 in. x 60.1 yd.
• PACK OUT: 1 Roll/Pack.
• SUSTAINABILITY: Made from 50% renewable resources; Adhesive made with natural rubber; Tape made in a site certified for energy management (ISO 50001 certified); Core made with 70% post-consumer waste.
• Tape Application Tips: For great paint results make sure the surface is clean, dry and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting.
• Tape Removal Tips: Wait until the paint is dry to the touch before removing the tape. Lift it up by slowly pulling it back on itself, then removing at a 45-degree angle.

Make your next painting task easier with this Scotch commercial-grade masking tape. The tape is made from natural colored crepe and features a nine percent break elongation to provide a discrete look and reliable adhesion. Each roll measures 0.94 inches wide and is 60 yards long, making it ideal for a range of commercial purposes. The tape resists splitting and peels off cleanly without leaving sticky residue behind, which also makes it suitable for labeling food items in restaurants or samples in labs.

• Sold as 1 Roll.