Rust-Oleum 248914A2 Truck Bed Coating Spray Paint, 2 Pack, Black, 2 Count

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Premium Bed Liner: Built for the Long Haul

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Choosing the Right Coating

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Proper Preparation for Better Results

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.