CMT 855.803.11 3-Piece Glass Panel Set in Hardwood Case, 1/2-Inch Shank, Carbide-Tipped

This unique CMT rail and stile set allows you to produce glass panel doors using a rubber panel retainer to secure the glass in a 1/8-Inch slot cut into the frames. The included 1/2-shank bits also make a square rabbet on the inside of your door for installing the glass panel. Bits feature super-strength superior steel bodies, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. Not for use on hand-held router. Use them on router table. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands. Included in the hardwood case you will find a Ogee Rail & Stile Set and a 1/8-Inch Slot cutter. From the Manufacturer Another innovative CMT product designed by Marc Sommerfeld. This unique stile and rail set allows you to easily produce glass panel doors utilizing a rubber panel retainer to secure the glass in an 1/8" slot that is cut into the door frames. This set works the same as our other stile and rail sets but leaves you with a square rabbet on the inside of your door for installing the glass panel. The bits are designed to machine all pieces face down. After machining the cope and pattern cuts use the 1/8 slot cutter to cut the groove for the rubber panel retainer. The edge of the pattern cut will ride on the guide bearing on the slot cutter bit (see drawing). When you cut the groove in the rails you can cut the slot the full length of the stock. When you cut the groove in the stiles you need to set up reference points to stop and start the cuts so they are hidden from view on the top and bottom of the doors. 1/2 Shanks.