Powder Paint Spray Gun Electrostatic Powder Coating System & Foot Remote Control

Specifications:
Model: PC03-2
Color:Red
Power voltage: 110 V, 60 Hz
Output pressure: 25 N/S
Power: 3.3 W
Voltage output(adjustable): 15 KV, 30KV （2 kinds to choose）
Power Cord: 16AWG
Air Inlet: 1/4 inch NPT Thread
Require air supply: 10-15 PSI, Dry air 5CFM
AMPS: 0.03 A
Pressure ratio: 6 / 8
product size:21*21.3*7.6cm
Product weight: 3.2kg
Package size: 41.5 x 28 x 22.5 cm(16.34 x 11.02 x 8.86 inch)
Weight: 4 kg (9 lbs)

Packages:
1 x Paint Gun
2 x Plastic Bottles (One Set On The Spray Gun)
1 x Control Box
1 x Foot Remote Control Switch
1 x Water Vapor Separator
1 x Power Cord
1 x Ground Wire
1 x Switch Line
1 x High-pressure Gun Lead Wire
1 x User's Manual

Cautions:
1. Wear a dust cover when working to protect personal safety.
2. The machine generates high-voltage static electricity, the workplace and the equipment must be dry when the user in use.
3. The machine must be safely grounded, do not unplug the grounding plug, which is to protect the machine and to prevent electric shock is very important.
4. Plastic powder particles fall into the air, the fire source, there is burning, the risk of explosion, so we must rule out all the hidden dangers, and all the fire source isolation.
5. To avoid the danger, after each use, discharge the needle to the ground clip to discharge.
6. Plastic powder on the ground not to use a vacuum cleaner to remove.