Modern Outdoor Wall Light 15.7inch Wall Sconces with 3 Color Lights 3000K/4500K/6000k IP65 Waterproof Outdoor Lighting for Porch Patio Fence Garden

Color Temperature: 3000K Warm White Light, 4500K Neutral White Light, 6000K Cool White Light. Power Source: Corded Electric. Voltage: Hardwired AC 85-265V 50-60HZ. Wattage: 12-18W. CRI: >=85. Lumen: 1800 Lumen. Style: Modern, Minimalist. Material: Acrylic + Aluminium + LED Strip + IP65 Waterproof Drive. Size: 15.7*2.3*1.3inch(40*6*3.5cm). Note: The width of this wall lamp can not cover North American standard electrical boxes. Water Resistance Level: IP65 Waterproof. Control Mode: Only accept a Normal wall switches. Three-Color Light Products Change the Light Color Temperature Setting: To change the light color temperature, you switch the light on and off, cycling through the 3 options. The color will be changed always in the following order. At first: 6000K Cool White, Next: 3000K Warm White, At last: 4500K Neutral White. NOTE: The 3-color wall light always defaults to cool white light at 6000K each time it is turned on. It can not keep the previous setting. Because it has no memory function. Material: Acrylic + Aluminium + LED Strip + IP65 Waterproof Drive. The back is made of aluminum, the luminous surface is made of black frosted aluminum alloy + white frosted acrylic plate combination, the texture presents frosted sense. Craftsmanship: Bending, Baking Paint, Welding, Grinding, Oxidation. Working Temperature: -15ºC to + 45ºC. Packing List: Wall light*1, Expansion screws*4, Bracket screws*4, Brackets*2, Hard-wired link cover*3, User Manual*1. Specific Uses for Product: Garage, Garden, Patio, Fence, Balcony, Yard, Home, Outdoor, Indoor, Kitchen, Storage Room, Doorways. Modern Rectangular Outdoor Light Installation Steps: Step 1: Confirm the distance of the holes on the light body first, and then punch the holes. Step 2: Please put the expansion screw into the hole, remove the fixing bracket on top of the lamp body, and then install the bracket in the corresponding position. Step 3: According to the color of the power cord on the lamps and lanterns distinguish, between Blue is Neutral Wire (N), Yellow is Earth Wire (E), and Brown is Live Wire (L). Step 4: Finally, connect the lamp body with the mounting bracket, fix it with screws, and shake it slightly to make sure the lamps are perfectly installed.